Author Topic: Can't seem to take RAW with my PowerShot SX200IS  (Read 30 times)

Offline ward1941uk

  • Newbie
  • *
  • Posts: 1
As far as I know I have done everything by the book, but obviously I haven't.

I have downloaded the correct file and used cardtrick to format my card and install chdk. I have gone through the process of updating the firmware and everything seems fine. I can access chdk menu etc and when I press the disp. button the camera appears to toggle between RAW  and jpg, but when I take shots that I think are in RAW and then download to my PC with either Canon's facility, or Adobe Bridge, or even by copying and pasting with explorer, all I see are jpegs.

The only thing that I can think I am doing wrong is that I have used a 4G card and I don't think that cardtrick partitioned it. I am sure CHDK is a wonderful program so what am I doing wrong?

Any help would be gratefully appreciated.

Offline waterwingz

  • Guru Member
  • ******
  • Posts: 2028
Re: Can't seem to take RAW with my PowerShot SX200IS
« Reply #1 on: Today at 02:40:24 »
As far as I know I have done everything by the book, but obviously I haven't.

I have downloaded the correct file and used cardtrick to format my card and install chdk. I have gone through the process of updating the firmware and everything seems fine. I can access chdk menu etc and when I press the disp. button the camera appears to toggle between RAW  and jpg, but when I take shots that I think are in RAW and then download to my PC with either Canon's facility, or Adobe Bridge, or even by copying and pasting with explorer, all I see are jpegs.

The only thing that I can think I am doing wrong is that I have used a 4G card and I don't think that cardtrick partitioned it. I am sure CHDK is a wonderful program so what am I doing wrong?
If you are able to load CHDK and work through the menus, then your card is partitioned correctly.

What you don't seem to realize is that you cannot access RAW images using the USB port on your camera - regardless of what software you try on your PC.  The camera knows nothing about RAW - CHDK created those images.

You need to pull the SD card from your camera, put it in an SD card reader on your PC and access the images that way.

And yes,  to anticipate your next question, its quite possible that you might not be able to open them in PhotoShop.

link> CHDK Wiki Page about RAW
link> CHDK Forum thread on RAW
link> CHDK Wiki Page about Raw Software
link> CHDK Forum Board for RAW

 


SimplePortal 2.3.3 © 2008-2010, SimplePortal