Eos 400d ( Rebel XTI )

[Foldesa]

Yep, I also faced the problem with iso higher then 3200. This must be the maximum of the sensor.
The past few weeks I had very little time My tries vere mostly adding/replaceing strings in the system menu. No success.  Now I'm tring to catch, waht happend when the camera is turned on, and laguage packs are initialized.
Meanwhile can we see your source for spot met., Factory mode atc?
Regards
A

[PhyrePhoX]

nice progress guys. do you have some example images taken with the "new" iso ranges? probably in raw? can you upload them somewhere, please?

[Foldesa]

All the iso settings from 32 to 3200 can be used with raw format. I've posted a code before, but if you tell me ( us ) what iso you want I can post a specific code and bin for you.
Regard
FoldesA

Sorry. You mean imeges. Tomorrow I will add some link for different ISO settings. I guess you are interested in iso 3200 for noise

[PhyrePhoX]

yes, iso3200 and also the (new) low iso range

[thaibv]

Hi again,

   Here are links to my code and bin file.
Bin: http://www.filefactory.com/file/ag6fd49/n/AUTOEXEC_BIN
Code: http://www.filefactory.com/file/ag6fd5c/n/autoexec_bin_rar

   Now you can change ISO and Spot metering mode separately.
Press Direct print to change iso on the fly,  press  Direct print while holding down AV+- button change Mettering mode to Spot.

   Press Drive mode button while holding down AV+- button turn on Factory mode. You will see Factory menu appear in the camera's main menu 1. Try Factory menu does not harm your Cam.

Note: Sometimes, it hang my 400d  and I have to turn it off then back on  and rarely have to remove the battery to restart.

[Foldesa]

As promised, here are two full size pictures of ISO 3200. A dark and a bright one.

http://web.axelero.hu/ednyfoldes/ISO/DARK.JPG
http://web.axelero.hu/ednyfoldes/ISO/BRIGHT.JPG

[thaibv]

Hi all,
Some pictures for you.

http://www.filefactory.com/file/ag62d9f/n/IMG_ISO12_JPG
http://www.filefactory.com/file/ag62eae/n/IMG_ISO100_JPG
http://www.filefactory.com/file/ag62ea7/n/IMG_ISO400_JPG
http://www.filefactory.com/file/ag62eb2/n/IMG_ISO640_JPG
http://www.filefactory.com/file/ag62ec0/n/IMG_ISO1600_JPG
http://www.filefactory.com/file/ag62ed3/n/IMG_ISO3200_JPG

Iso 12 and 100 have no difference, Iso 3200 is nod bad.

Metering modes:
http://www.filefactory.com/file/ag62eeh/n/IMG_Spot_JPG
http://www.filefactory.com/file/ag62ef1/n/IMG_Partial_JPG
http://www.filefactory.com/file/ag62ege/n/IMG_Evaluative_JPG

[matthias87]

[Foldesa]

No, This is not an iso file or some sort.
If you read carefully, the post you'll find that thaibv wrote it step by step, how to use it.
here: http://chdk.setepontos.com/index.php/topic,3290.msg34785.html#msg34785

[thaibv]

Have a nice day,

Finaly find out why it hang my camera sometimes and corrected it. Now it work like built in features  
Here are links for you:

Bin file: http://depositfiles.com/files/qprih7jiz
Source: http://depositfiles.com/files/1byt0v0ct

My 400d does overexposure if setting ISO lower than 100, Others values are OK.
Could some one please test and post result here.

Thanks!

[thaibv]

[matthias87]

[bugmenot]

I did all this things step by step, too, and i think my entries in the hex editor are allright.


is there anyone with a working 400d with 3200iso?

what have i to do with the source? what is the confirmation for iso 3200?

[T.B.]

Same here.

This is, waht i've done:
http://img291.imageshack.us/img291/9996/cardtricks2.jpg <-- Cardtricks screenshot
http://img145.imageshack.us/img145/103/hxd2.jpg <-- HxD screenshot
Your .bin file (http://depositfiles.com/files/qprih7jiz) is in root-directory.

But when i put the card into my 400D, nothing happens. And now?

[thaibv]

Hi all,

@ bugmenot, matthias87
Full guide here: http://depositfiles.com/files/ctyp3iso9

@ T.B.
Set your Cam iso to 1600, wait 4 secs until your viewfinder display turn off and press Direct Print button.  After your 400d sounds "beep beep", take a picture then press DISP. and find ISO value.