G10 Porting Process

[reyalp]

How can I Help ?
I have a CANON G10 and can programming Assembler.

Welcome!
see http://chdk.wikia.com/wiki/For_Developers especially http://chdk.wikia.com/wiki/Adding_support_of_a_new_camera

[Ju]

Hi.

I'm getting a G10 in the next few days.
I've read through the Dev pages, I think a promising way would be to use the files from the G9.
I attached a file showing the differences between G9 and G10.
Now I'm reading thorugh the whole stuff here https://tools.assembla.com/chdk/ , let's see...

[jimstr]

I applaud your enthusiasm! let's hope things develops in the upcoming weeks! I am sorry but I am not able to contribute other than testing the files once they get released. goodspeed!

[Coop]

Hi guys! Just signed up for the forum, I'm too stupid to help out on the development of CHDK for the G10 (well, other than testing maybe). But I just wanted to let you guys know that I really appreciate the work you're putting into this and I can't wait to start using CHDK on my G10....

Keep it up guys!

[bratfisch]

@Ju:

I'm glad to hear that another person with some knowledge of ASM will get a G10

I've continued to port the G10, I'm stuck...

Loading the CHDK (aka resetcode/entry.S & resetcode/main.c) works fine - sub/g10/boot.c seems to be fine, too - but after exiting boot.c the camera just reboots....

Shall I upload my code somewhere? Do you want to join the debugging-session?

[lightfusegetaway]

The wait for this one is going to be unbearable... 

I have little programming ability but I'm definitely willing to beta test the G10 port.

I have a feature request also: a "stealth mode" that can be used to turn off the LED's on top of the camera. I also placed this in the feature requests forum.

Thank you all for your hard work.

[jimstr]

Is there still people investing effort in this? hopefully don't abandon just yet and go to the G11!!

[hanfpartei]

Hey guys,

I'm really interested in giving the G10 Porting Process a new push.
I'll dig in the documentation this evening.

@bratfisch are you still stuck with your reboot problem? did you upload the code somewhere?

[cjmargetou]

Hi,
I am a newbie to the forum, I would like to do what I can to help the process along.  I am a computer consultant with a good amount of experiecne in various imaging realms, although with very little in coding.  I do have a g10, let me know what I can do to help.


Thank you

[reyalp]

Hi,
I am a newbie to the forum, I would like to do what I can to help the process along.  I am a computer consultant with a good amount of experiecne in various imaging realms, although with very little in coding.  I do have a g10, let me know what I can do to help.

http://chdk.wikia.com/wiki/FAQ#Q._My_camera_isn.27t_ported_yet._Is_a_port_planned_.3F_When_will_it_be_ready_.3F_How_can_I_help_.3F

[DrunkenTech]

I'll throw in another "got the camera but no ASM skills" shout out. Would love to see this for my G10 at some point...

[RaduP]

Do you have C skills?
I have very little ARM assembly skills, but if you are good with C you should do pretty well.

[DrunkenTech]

Do you have C skills?
I have very little ARM assembly skills, but if you are good with C you should do pretty well.

Hehe, no, unfortunately no real developer skills.

[RobC]

Hi

I have zero programming skills, but just wanted to add my support for a G10 port.  I have a G10 so I'd be able to assist with testing.

I'd like to hang my G10 under a remote controlled helicopter and use it for aerial photography. We've recently purchased a r/c system, but it came with a Panasonic LX3 (10meg) camera and the G10 is so much better.

To control the camera remotely we'll be using one of these :
http://www.blip.com.au/item.aspx?itemid=14

If you'd like to have a peek at our aerial photo project, the website is:
http://www.air2you.ca

Thanks
Rob

[velvet]

So hows the porting process coming along guys?
i would love to help but unfortunately don't have the skills required