S90 Porting Thread

[Camera Obscura]

I just wanted to offer some words of encouragement to all of you on the S90 firmware dump.  Thanks for giving this a serious effort! 

The S90 is a fantastic camera with a lot of capabilities.  But CKDK would allow for correcting one big deficinecy that I am not happy with - that is the low bit rate on the video.

Thanks!

 

[rachelkitty]

OK, well, finally managed to get stable data transmission with no errors but only at 1200bps. Dumping rom at the moment, gonna take a long time tho

[Microfunguy]

Hope your batteries are fully charged 

[rachelkitty]

thankfully, yes, i'm keeping an eye on the last reached address tho, in case i need to recharge and restart later on.

[rachelkitty]

OK, this is the finished dump from address 0xFF810000. All addresses from 0xFF800000 to 0xFF810000 were value 0xFF. All addresses after the end of this file are value 0xFF as well.
http://rapidshare.com/files/330257144/S90_GM1.00C.bin

EDIT: New dump, 0xFF810000 - 0xFFFFFFFF, previous one was flawed

[Microfunguy]

OK, this is the finished dump

Historic event !   

[rachelkitty]

Guess I should grab IDA and take a look at things, but I've never coded for ARM before

[Microfunguy]

It would seem RapidShare are not too keen to allow free downloading at present.

You could try ZShare.net.

[rachelkitty]

S90_GM1.00C.bin - 4.07MB

[Microfunguy]

Got It !

[rachelkitty]

having a look through it at the mo, trying to find the various function addresses

[Microfunguy]

This does not look right in IDA.

The downloaded ZShare file is 1,306 KB.

EDIT:

That is better, I have downloaded again.

[rachelkitty]

zshare has screwed something up then. try this http://pinkfur.org/mig/S90_GM1.00C.bin

[Microfunguy]

Well, that kept IDA occupied for quite some time.

Seems O.K.

For the benefit of future porters, could you describe each step as you proceed, including the blinking procedure ?

[Camera Obscura]

rachelkitty -

Thank you!!!