Author Topic: Feature request: Renumber photo's  (Read 1273 times)

Offline jojo99

  • Rookie
  • *
  • Posts: 41
Re: Feature request: Renumber photo's
« Reply #15 on: 04 / May / 2010, 13:12:41 »
No, Canon did not replace the camera (I wish they had done so).  I know because the outer case was still scratched on return and the serial number was still partially worn off.  They replace various internal parts.

What is the vers.req trick?


See:

http://chdk.wikia.com/wiki/Vers.req#Q._How_can_I_get_the_original_firmware_version_number_of_my_camera.3F


The firmware is the original firmware:

GM1.00D
E18
July 7, 2007

Canon doesn't seem to issue firmware updates.
A650 IS w/waterproof housing, SanDisk Extreme III 2GB card

Online hiker_jon

  • Full Member
  • ***
  • Posts: 215
Re: Feature request: Renumber photo's
« Reply #16 on: 22 / May / 2010, 01:05:14 »
Hi,
This is slightly different request from the original:
I often take a few pictures then want to reorder them while still in the camera.  Usually I want to take a later image and put it into a previous slot (where there may or may not be an open image number).  I know of no way to do this in the camera.  I would need two functions:
1.  Starting at a certain image, add one to the image number of each image.
2.  Rename an image (to put it into the gap I have just created).

Jon

 


SimplePortal 2.3.3 © 2008-2010, SimplePortal