There doesn't seem to be the firmware update option required to load CHDK.
You have to use the bootable SD card method.
I've tried a couple of methods on there. Both the After 2010 and Before 2011 guides and I'm still not in CHDK. The camera just says the card is locked. Is it a case of me doing it wrong or that the F version won't work with my G camera?
I've tested it using the alternative CHDK PTP client and it seems to work well with that. Menus seem ok, no crashes yet.
Added theIXUS110 / SD960 1.01Gfull 8MB dump (dumped with cBasic udumper) by ant_thomas from this forum post to the CHDK P&S FW dumps repository.
First test version for firmware 1.01fSince I can't test this myself, please report whether it works, and any issues that you find.You have to use the bootable SD card method.Please note that- you can enter/leave ALT mode by a short press on the play [>] button- you have to press the play button longer for its original function- you must leave ALT mode to be able to switch the camera off with the on/off buttonupdateThis build is also compatible with the 1.01g firmware version. If you'd like to get current CHDK builds for 1.01f, 1.01g, please test this version and report your results in this thread.
My IXUS 110 IS has the firmware GM1.00B. I just hope it's not too different to the already known firmware versions
and another build can be provided for my version.
Started by uri998 CHDK Releases
Started by c10ud « 1 2 ... 77 78 » DryOS Development
Started by msaddicted Firmware Dumping
Started by msaddicted DryOS Development
Started by nafraf « 1 2 ... 31 32 » DryOS Development