Eos 400d ( Rebel XTI )

thaibv

@ T.B.
Yes, I have corrected the error and upload it.
Pls download here.
bin: http://depositfiles.com/files/q3qf9wlmi
code: http://depositfiles.com/en/rmv/4635584710418704

I think it turn off display sometimes becoz you press DP too fast and continuously.

T.B.

Thanks for the new .bin file! You are very fast.
Yes, you're right. Today, i was at a private poolparty. I shot with your actual .bin file to test it.
I could reproduce the error, when i changed the ISO blind and fast.

But i had another problem: Sometimes, i get the "Error99". I would say, every 20-30 picture (RAW+L) couldn't be saved, because there was an Error99...

vatoz

Hello thaibv.
Your code download link in reply #91 doesn't work, it looks like code for file deleting.

thaibv

Ahhhh,

Sorry, I copy and paste wrong link

The corect one is here: http://depositfiles.com/files/utoebjg8m

EOS 400 D MAN

Do you think it is possible to add Auto-ISO?
Sorry for my bad English.

Michael

Zibri

Everything is possible.
At the moment the top priority should be to have the right ISO in the display.

EOS 400 D MAN

Yes that is more important.

thaibv

Do you really think AUTO ISO will be a good features in Creative Mode?

I think extend Auto-ISO range over 400 in Auto and Image modes is better

thaibv

Hi again,

woud you like something to test?

Please:
bin: http://depositfiles.com/files/xmvw5wzu8
code: http://depositfiles.com/files/qhjxzdmmd

it is nearly no error but turn off display if press DP toooo fast. Spend several hours to find out why it switch off display but not success. It become a pain now :'(

briveira

mmh, after taking a 3200 ISO picture the screen does not work (it does not show the photo just taken), and hungs doing other things (like changing ISO, has just happened to me, had to remove battery) - but spot measurement works very well

briveira

Also, it does not go below ISO 80 (maybe it shouldnt 😀

briveira

thaibv, the one in msg #91 works better for me

thaibv

Hi again,

Tested and know for sure that the error that turn off disp cause by Canon System MessageQueue Function. It cannot handle too much key press in a little time (when press DP too fast and continuously). So have to slow it down

Pls try this version:
bin: http://depositfiles.com/files/x8gvyr8jh
code: http://depositfiles.com/files/kwcyvo9o4

will check CreateMessageQueue Procedure and post result.

@briveira:
thanks for testing. Pls download my first posted bin file to try iso lower than 80, but infact it unusable.

briveira

thaibv, ISO3200 now works, and I was unable to hang the camera (for now) 😀

there's one problem left: somehow after changing ISO to a non standard one, you cannot change to ISO 100; as a software developer, without looking through the source code, it is as if the menu code does not notice the change to ISO 100 because it shows it as the default selected option whenever you have a non-standard ISO selected

of course, you can change to another stardard ISO (200, 400...) and then go to ISO 100, just move the menu selection

briveira

mmmmh, managed to hang it again pressing DP very fast...
here is the STDOUT.TXT http://briveira.com/400dchdk/STDOUT.TXT

thaibv

@ briveira
you are right

the menu code does not notice the change to ISO 100 because it shows it as the default selected option whenever you have a non-standard ISO selected

, this is not a problem.

I will change some code to force it set iso to 100 when press SET right after show ISO diaglog.

I shoot a hundred pic today and it turn off my 400d's display one, and i face another problem that when in play mode delete button not work.

Thanks!

thaibv

Hi again,

Could some one hang your 400d using this bin file pls! 😁
bin: http://depositfiles.com/files/jdmun9g0c

enjoy it.

mx3

thaibv
I wonder did you publish source code of your project?
would not it be useful to upload it to svn?
I think it would accelerate development...

...
edit: found source code 😀

rfssksd

thaibv
Hi again,

Could some one hang your 400d using this bin file pls! 😁
bin: http://depositfiles.com/files/jdmun9g0c

enjoy it.

This last release works greatly on my 400d, but I noticed a little bug, when you set ISO 2500 the LCD wrongly displays "ISO 2200".

I think this will be fixed very easily.

Thanks to the developers for working on this hack!!

thaibv

Hi all,

rfssksd
This last release works greatly on my 400d, but I noticed a little bug, when you set ISO 2500 the LCD wrongly displays "ISO 2200".

Oh yes, this bug stay there for a month.

The correct one here:
bin: http://depositfiles.com/files/0zwohq1wl
code: http://depositfiles.com/files/ii78hnswj

« Previous Page Next Page »