guffster
eduperez
repeater
eduperez
What you need is intervalometer + longer exposures, no bracketing involved, no?
Yes - that is exactly what I would like. Thanks for your help!
Now that I think about this... if you set the camera on BULB mode, and configure the
same value for both "Manual [" and "Manual ]" (*), then you get an one-exposure EAEB, which can be used from the intervalometer to achieve exactly what you want.
(*) These should probably be renamed to "Bulb min" and "Bulb max" now.
The Question: If I wanted to set the camera to take 20 shots using the intervalometer, with each shot being 5 minutes long, how would I do it?
If I am following this correctly, then this would give @repeater "almost" exactly the solution desired. The choice of "5" minutes is not possible with current 400plus, it would need to be 1,2,4,8 or 16 minutes right?
This would be the setup:
[list]
[li]Shortcuts menu: Yes[/li]
[li]Ext. AEB> Delay: No or 2s[/li]
[li]Ext. AEB> Frames: 1[/li]
[li]Ext. AEB> Step (EV): Off[/li]
[li]Ext. AEB> Manual [: 4'[/li]
[li]Ext. AEB> Manual ]: 4'[/li]
[li]Interval> Delay: No or 2s[/li]
[li]Interval> Time (s): 0 - 250[/li]
[li]Interval> EAEB: Yes[/li]
[li]Interval> Shots: 20[/li]
[/list]
This would be the workflow:
[list]
[li]Set Camera Mode Dial to "M" for Manual.[/li]
[li]Adjust main dial all the way to left to "BULB" setting.[/li]
[li]Make any other settings/changes desired for your shot(s).[/li]
[li]Press DP (DIRECT PRINT) to enter Shortcuts menu.[/li]
[li]Press DOWN (WB) to highlight Intervalometer script.[/li]
[li]Press SET to launch highlighted Intervalometer script.[/li]
[li]wait...[/li]
[/list]
The outcome would produce 20 shots with
5 4 minute exposures.