ERR99 genervi nope, same as before 😳 100c, third try: Fixed some wrong function pointers. So please try the attached file.
genervi ERR99 100c, third try: Fixed some wrong function pointers. So please try the attached file. how should i say it? - the cam is a diva. Third diskboot.bin, and she wouldn`t boot it 😉 now its recommend to put the batt out before using again.
yujin I have a quick test on my S90 with fw 1.01a. Optical zoom while taking movie works perfectly! MF using Zoom lever doesn't work, I assume it is normal, right? Thx ERR99 for bringing CHDK to us!
genervi thanks again, but it seems not to be our day .. no booting on both 100c diskboots now, also tested with second sd card 🙁
genervi ERR99 If both above 100c files are not working, test this one (its without spytask): This one boots - says "karte schreibgeschützt"
ERR99 Okay. Please check if this build is also booting and if the write protect message is gone: <FILE DELETED>
genervi ERR99 Okay. Please check if this build is also booting and if the write protect message is gone: No, this one don`t boots
casimero genervi ERR99 Okay. Please check if this build is also booting and if the write protect message is gone: No, this one don`t boots here the same 🙁
ERR99 Oh dear, it looks like that some how my IDA workspace of the 100c gots corrupted. So i extracted a lot of wrong stubs_entry_2.s pointer. >🙁 If have to scratch that work and do it again. This will take some time....
genervi ERR99 Oh dear, it looks like that some how my IDA workspace of the 100c gots corrupted. So i extracted a lot of wrong stubs_entry_2.s pointer. >🙁 If have to scratch that work and do it again. This will take some time.... Sorry for this 🙁 I`ll think of U .. and wait patiently 😀
mercurio Technics Not as far as I'm aware. I thought maybe you had a new version. 101a came on a S90 I picked up a few days ago seems unlikely. as i stated before i have one which says GM1.01c so i suppose its 101C, but as i tried to dump the fm it doesn't work at all. (4gb sdhc card) anny hints?
genervi mercurio as i stated before i have one which says GM1.01c so i suppose its 101C, but as i tried to dump the fm it doesn't work at all. (4gb sdhc card) anny hints? hello mercurio, please read the instructions - you find them on other point of this forum. To know wich FW you have you can use Attached ver.req - put it on sd - switch cam on in play mode while pressing set, then holding and press display once, on the screen you can see your FWcode. For the dump you should begin with a 2GB card - with cards over 2GB its a little complicated - you find the instructions in the help files in this forum. Have fun gen EDIT: Link to help Posts: https://chdk.setepontos.com/t/help-using-chdk
ERR99 Okay, lets try again a 100c build. Most of the stuff is still disabled, but hopefully the functions/functionpointer are now correct. So lets try a build, only with activated Physwitch task. If everything is correct, camera should boot (without write protect message). So please test this on 1 S90 with 100c firmware. <FILE DELETED>
genervi ERR99 Okay, lets try again a 100c build. Most of the stuff is still disabled, but hopefully the functions/functionpointer are now correct. So lets try a build, only with activated Physwitch task. If everything is correct, camera should boot (without write protect message). So please test this on 1 S90 with 100c firmware. YES 😀 S90 is booting without write protect message ! ! !
ERR99 Fine. 😉 So lets try starting the SpyTask on 100c. CHDK splash screen should be visible after a small delay (if everything is ok). <FILE DELETED>
genervi ERR99 Fine. 😉 So lets try starting the SpyTask on 100c. CHDK splash screen should be visible after a small delay (if everything is ok). Second yes .. very good work! 😉 booting - chdk splash screen is visible!
