supplierdeeply

the sx10 porting thread

  • 613 Replies
  • 144078 Views
Re: Is CHDK for SX10 possible in the future
« Reply #10 on: 09 / November / 2008, 21:43:29 »
Advertisements
hey that was a quick reply - thanks for the input.

I read that S5IS has firmware version GM1.00b  (some units I heard has GM.100A).   But SX10 uses DIGIC 4 (vs S5IS'  DIGIC 3) so it seems like there would be lots of work for this CHDK version.  Too bad I dont code assembler nor C (does Cobol count? j/k!!)

*

Offline reyalp

  • ******
  • 10069
Re: Is CHDK for SX10 possible in the future
« Reply #11 on: 09 / November / 2008, 23:43:00 »
The firmware version numbers don't indicate similarity across camera models as far as I know. That is, GM1.00b on one model isn't necessarily related to GM1.00b on another.

Each model/firmware rev requires it's own CHDK port (except in some rare cases where different firmware revisions of a given model are minor enough that they don't require a new CHDK version)

Some models are more closely related to each other than others, both due to hardware similarity or software re-use, but the version string doesn't tell you this.
Don't forget what the H stands for.

*

Offline Gran Canaria

  • *
  • 24
  • S2 SX10 or SX1
Re: Is CHDK for SX10 possible in the future
« Reply #12 on: 17 / November / 2008, 06:13:40 »
mine states ver GM1.01A
October 3rd

if a developer needs a dump or whatever, if you tell me how to do it, I am sure would be glad to help.

*

Offline whim

  • ******
  • 2013
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: Is CHDK for SX10 possible in the future
« Reply #13 on: 17 / November / 2008, 06:33:51 »
@Gran Canaria

If you're on Windows, try CardTricks (link in my signature)
use the 'NewDryOS' option, this has worked for me on ixus870_sd880,
which is also DIGIC 4.

wim


Re: Is CHDK for SX10 possible in the future
« Reply #14 on: 17 / November / 2008, 20:10:32 »
Hey Guys,

New here as a member, but I've been over on the hv20 boards, listening to them try and get CHDK ported to the hv20

I have the SX10... I have no idea what to do CHDK wise... I'm on a mac, so can't use anything windowswise..

But ill try to help, just tell me what to do.. heh


Zac

*

Offline Gran Canaria

  • *
  • 24
  • S2 SX10 or SX1
here is the SX10 dump
« Reply #15 on: 18 / November / 2008, 18:24:27 »
the screen blinked on for a moment and went dark, so I waited 1 min, opened the batterie door and took out the card as instructed.
ok, did that, the file is 16,385k big.
did strings and clean
now it is 4,089k
here it is:
RapidShare: Easy Filehosting
« Last Edit: 18 / November / 2008, 18:34:05 by Gran Canaria »

*

Offline reyalp

  • ******
  • 10069
Re: Is CHDK for SX10 possible in the future
« Reply #16 on: 18 / November / 2008, 22:21:40 »
Loads at FF81000

DRYOS version 2.3, release #0031
Don't forget what the H stands for.

*

Offline Gran Canaria

  • *
  • 24
  • S2 SX10 or SX1
2nd SX10 dump
« Reply #17 on: 19 / November / 2008, 05:36:28 »
I used the newest cardtrick 1.41 to see if there is a difference.
no screen flickers on
the dump is 10,176k
the cleaning cleans just the leading 00
the PRIMARY_cam-firm.bin is 8,127k

so here is that SX10 dump also
RapidShare: Easy Filehosting


Re: Is CHDK for SX10 possible in the future
« Reply #18 on: 16 / December / 2008, 15:32:29 »
It looks like GM1.01A is for PAL version. Mine is "NT"sc


Mine shows

Canon Poweshot SX10 IS
P-ID:318-D NT D


Firnware  Ver GM1.00C
No Error
Sep 14 2008 14:57:56


when I hit Func set + Disp (clicking Disp twice) it shows:

Adj Ver: 019.007


when I click DISP yet again while holding down the Func Set button:


Total Shoot: xxx
Zoom Retry Count: 0
Mecha Condition: 0X0000000


Am still figuring how to capture the dump

Re: Is CHDK for SX10 possible in the future
« Reply #19 on: 21 / December / 2008, 21:42:02 »
My SX10 is also NTSC.


Page1 shows:

Canon Powershot SX10 IS
P-ID:318D  NT D


Firmware Ver GM1.00C
E18
Sep 14 2008   14:57:56


Page2 shows:

Canon Powershot SX10 IS
P-ID:318D  NT D


Adj Ver.019.007
UsmMinFreqError
2008.12.20  15:05:15


Page3 shows:

Canon Powershot SX10 IS
P-ID:318D  NT D


Adj Ver.019.007
IS Firm Ver.  2.33
IS Param Ver.  2.03
VcmCPU Ver 0.40



How come I don't have the "total shoot" info?

 

Related Topics