Hi,
My SD770IS 1.0.0a works just fine with DISKBOOT.BIN (from post#39) installed on a "small" card. Great job. Thank you!
I have 8GB SDHC and I've created as advised 2 partitions:
- small/FAT16/bootable with DISKBOOT.BIN on it (and CHDK folder created later) and;
- large/FAT32.
CHDK boots up fine, but the large partition is not visible/available to the camera. Any advice?
I've tried so many ways/programs described in different posts and the result is just the same - the large partition is not made available (by CHDK) to the camera.
And... in case everything works as it is expected and the second partition is open to the camera for saving the images how do I dump the images off the SDHC card as when used in a card reader the second partition is not available to WinXP unless I use "SDM Installer" to swap the partitions?
Thanks