Can't get CHDK installed on G9 using Ubuntu - General Help and Assistance on using CHDK stable releases - CHDK Forum
« previous next »
Pages: [1]   Go Down

Can't get CHDK installed on G9 using Ubuntu

  • 1 Replies
  • 5701 Views
*

Offline BioGeek

  • *
  • 1
Can't get CHDK installed on G9 using Ubuntu
« on: 16 / April / 2009, 09:21:05 »
Advertisements
Hi all,

I'm having trouble installing G9 (firmware version D) using Ubuntu Linux.

Following this blog post, I formatted my 4 GB SD card in-camera, then used hexedit to write BOOTDISK at position 0x40, copied "DISKBOOT.BIN" and "PS.FIR" onto my SD-card via the card reader, slid the "Lock" on the SD card and turned the camera on, but no CHDK boot screen or any special menus appeared. It only says "Card locked!"

Am I overlooking something, or what am I doing wrong?

Thanks in advance.
« Last Edit: 16 / April / 2009, 09:28:57 by BioGeek »
Logged
*

Offline fe50

  • ******
  • 3147
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: Can't get CHDK installed on G9 using Ubuntu
« Reply #1 on: 16 / April / 2009, 13:37:47 »
Hello & welcome, BioGeek !

Quote from: BioGeek on 16 / April / 2009, 09:21:05
I'm having trouble installing G9 (firmware version D) using Ubuntu Linux.
Following this blog post, I formatted my 4 GB SD card in-camera, then used hexedit to write BOOTDISK at position 0x40, copied "DISKBOOT.BIN" and "PS.FIR" onto my SD-card via the card reader, slid the "Lock" on the SD card and turned the camera on, but no CHDK boot screen or any special menus appeared. It only says "Card locked!"

You say " I formatted my 4 GB SD card in-camera" - the camera formats a 4GB card with FAT32, but the autostart mechanism needs FAT16; format your card on the PC with FAT16 & it should work...

You can also use the manual loading method ("Firmware Update" from the Canon menu)...
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics