IXUS 110 IS - SD960 - Firmware Dumping - CHDK Forum supplierdeeply

IXUS 110 IS - SD960

  • 29 Replies
  • 9767 Views
IXUS 110 IS - SD960
« on: 03 / May / 2009, 20:56:16 »
Advertisements
Using CardTricks and newDryOS on a 1Gb SD card. Powering up in playback mode does nothing (which I gather is a good sign), however no dump is produced.

Any tips would be much appreciated.

I've been scouring the forums and wiki for next steps, but have been unsuccessful in determining what I might try next.

Thanks,

Peter


Re: IXUS 110 IS - SD960
« Reply #1 on: 06 / May / 2009, 19:46:05 »
From what I gather from other reports, the current udumper code does not work on some of the newer cameras.  Can you post the data returned from the ver.req file.
http://chdk.wikia.com/wiki/FAQ#Q._How_can_I_get_the_original_firmware_version_number_of_my_camera.3F

Re: IXUS 110 IS - SD960
« Reply #2 on: 03 / June / 2009, 15:31:12 »

Re: IXUS 110 IS - SD960
« Reply #3 on: 11 / June / 2009, 12:52:34 »
It's a little tricky on this camera because the disp button is the bottom of the scroll wheel.

I get

P-ID:31BD NT D

Firmware ver GM1.01D


Re: IXUS 110 IS - SD960
« Reply #4 on: 25 / June / 2009, 17:44:53 »
I posted the ver.req results a month ago on:

http://chdk.wikia.com/wiki/SD960IS

I also have had no luck with the udumper program. 
I've got an SD960 also, a tiny bit of programming experience, and am willing to help. 

Any tips/tricks will be appreciated. 

Re: IXUS 110 IS - SD960
« Reply #5 on: 25 / June / 2009, 20:35:32 »
Just finished multiple attempts using the Cardtricks dumper.  Tried for 1 min, 2 min and 10 min.  Nothing in the dump file.   

Of note: only the NewDryOS dumper responds correctly (no camera response when display selected).   The other dumpers cause camera to come on and display "Card Locked" error message at bottom of screen. 

So the newDryOS must be the one or close to it. 

*

Offline reyalp

  • ******
  • 11802
Re: IXUS 110 IS - SD960
« Reply #6 on: 25 / June / 2009, 20:43:56 »
This sounds like the other new cameras that don't work with udumper. See http://chdk.setepontos.com/index.php/topic,3347.0.html for some discussion.
Don't forget what the H stands for.

Re: IXUS 110 IS - SD960
« Reply #7 on: 25 / June / 2009, 21:44:43 »
reyalp:

checked out that post -

I had similar reactions except I was able to get the firmware information (posted on the SD960 page - see above). 

I also used a full sized SD card, though it was of an antique 128 Mb size (should not have mattered since the file sizes are so small). 

I wonder where we go from here?   



*

Offline reyalp

  • ******
  • 11802
Re: IXUS 110 IS - SD960
« Reply #8 on: 25 / June / 2009, 21:56:07 »
If you are a coder, you can try to do something with FI2 files, as discussed later in that thread. If not, there's not much to do.
Don't forget what the H stands for.

Re: IXUS 110 IS - SD960
« Reply #9 on: 02 / July / 2009, 21:38:53 »
I looked at the thread, but found nothing on FI2 files. 

I'm willing to spend some time working on this...

 

Related Topics