supplierdeeply
« previous next »
Pages: [1] 2   Go Down

SX10: Firmware version GM1.03A

  • 15 Replies
  • 5763 Views
*

Offline martinhamersky

  • *
  • 10
SX10: Firmware version GM1.03A
« on: 24 / June / 2009, 14:19:53 »
Advertisements
Hi. Sorry I can too litle speak English, but I'm Czech  :)

Hi, I've got "Canon SX10" firmware ver. 1.03A and I would like to ask.... Can run previous version of firmware on this model or  will you plan CHDK for this version. Thanks.

Here is link for firmware GM1.03A:
I dont know that it is really correct firmware because I found it on deutsch site:

http://www.wirklemms.de/chdk/forum/viewtopic.php?p=10879

http://drop.io/fe50pub

http://rapidshare.com/files/248207830/SX10_1.03A_PRIMARY_cam-firm.zip.html

Thanks for your answer.

Logged
*

Offline reyalp

  • ******
  • 11268
Re: SX10: Firmware version GM1.03A
« Reply #1 on: 24 / June / 2009, 20:15:48 »
Quote from: martinhamersky on 24 / June / 2009, 14:19:53
Hi, I've got "Canon SX10" firmware ver. 1.03A and I would like to ask.... Can run previous version of firmware on this model or  will you plan CHDK for this version. Thanks.
No, 103A needs a new port.
Logged
Don't forget what the H stands for.
*

Offline fe50

  • ******
  • 3083
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: SX10: Firmware version GM1.03A
« Reply #2 on: 25 / June / 2009, 03:44:08 »
The 1.03a dump is 100% identical with the 1.02b; although the ver.req method shows

   Powershot SX10 IS
   P-ID 318D PALD
   Firmware Ver. GM 1.03A

on this camera, we have

   00068830   00068830      0   Jan  9 2009
   0006883C   0006883C      0   15:10:11
   00068848   00068848      0   Firmware Version 1.02
   00068868   00068868      0   Firmware Ver GM1.02B

in the dump...that's why i did not add the 1.03a dump to the dump repository.
Logged
*

Offline reyalp

  • ******
  • 11268
Re: SX10: Firmware version GM1.03A
« Reply #3 on: 25 / June / 2009, 04:04:41 »
That's odd, because there are several reports that the 102B port doesn't work on 103A ???

edit:
Could the dump be from the wrong camera ? The GM1.03A in the display most come from ROM somewhere.
« Last Edit: 25 / June / 2009, 04:06:26 by reyalp »
Logged
Don't forget what the H stands for.
*

Offline martinhamersky

  • *
  • 10
Re: SX10: Firmware version GM1.03A
« Reply #4 on: 25 / June / 2009, 04:51:50 »
I have got 8GB SDHC card and after start CHDK flash firmware 1.02b camera display become black. I have to pull up batteries
Logged
*

Offline fe50

  • ******
  • 3083
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: SX10: Firmware version GM1.03A
« Reply #5 on: 25 / June / 2009, 07:07:40 »
Quote from: reyalp on 25 / June / 2009, 04:04:41
That's odd, because there are several reports that the 102B port doesn't work on 103A ???
Yes, until now the fw Version string in the dump was always the same as reported by the ver.req method...

Quote
Could the dump be from the wrong camera ? The GM1.03A in the display most come from ROM somewhere.
To be sure a 1.03A user should dump this fw again...
Logged
*

Offline martinhamersky

  • *
  • 10
Re: SX10: Firmware version GM1.03A
« Reply #6 on: 29 / June / 2009, 16:42:04 »
Here is BIN file from my camera with Fw GM1.03a
http://drop.io/1u4p3st
Logged
*

Offline fe50

  • ******
  • 3083
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: SX10: Firmware version GM1.03A
« Reply #7 on: 30 / June / 2009, 02:55:28 »
Quote from: martinhamersky on 29 / June / 2009, 16:42:04
Here is BIN file from my camera with Fw GM1.03a
http://drop.io/1u4p3st
This dump looks good ! (so the old one from the german forum wasn't correct...)
Apr 16 2009
0006883C   0006883C      0   09:16:03
00068848   00068848      0   Firmware Version 1.03
00068868   00068868      0   Firmware Ver GM1.03A

...added to the dump repository & updated the wikia...

The 1.03A is very similar to the 1.02b, all addresses are shifted for 14 bytes from proc UI_StrobeCon_Start on...
Logged
*

Offline pwsharp

  • *
  • 3
Re: SX10: Firmware version GM1.03A
« Reply #8 on: 04 / July / 2009, 08:10:27 »
SX10 (1.03a) & CHDK newbie, wondering how long I should expect the 1.03a port to take. Months? Weeks? Keep up the good work :-)
Logged
*

Offline reyalp

  • ******
  • 11268
Re: SX10: Firmware version GM1.03A
« Reply #9 on: 04 / July / 2009, 15:55:17 »
Quote from: pwsharp on 04 / July / 2009, 08:10:27
SX10 (1.03a) & CHDK newbie, wondering how long I should expect the 1.03a port to take. Months? Weeks?
There is no schedule. Could be tomorrow, could be never.
Logged
Don't forget what the H stands for.
Pages: [1] 2   Go Up
« previous next »
 

Related Topics