A1100 IS Porting thread - page 39 - DryOS Development - CHDK Forum supplierdeeply

A1100 IS Porting thread

  • 646 Replies
  • 135939 Views
*

Offline hha1

  • *
  • 26
Re: A1100 IS Porting thread
« Reply #380 on: 02 / August / 2010, 21:56:33 »
Advertisements
Thanks for helping me. Now there is option to update fw, but when I do it camera just shuts down. My fimware id 1.00 C. Any advices? And sorry for lame questions and bad english;)

The diskboot.bin posted by bvv-cp  about a month ago works with the A1100 FW100C, but the A1100 needs to be powered up in review mode, then tap the shutter button to get into shoot mode. A little confusing, but not all CHDK feature work. Read my posts over the past two months for details.

The basic  uBasic syntax works, but not some of the fancier ones. As anybody checked which version of the syntax extensions were implemented? 

hha

*

Offline hha1

  • *
  • 26
Re: A1100 IS Porting thread
« Reply #381 on: 02 / August / 2010, 21:57:52 »
Thanks for helping me. Now there is option to update fw, but when I do it camera just shuts down. My fimware id 1.00 C. Any advices? And sorry for lame questions and bad english;)

The diskboot.bin posted by bvv-cp  about a month ago works with the A1100 FW100C, but the A1100 needs to be powered up in review mode, then tap the shutter button to get into shoot mode. A little confusing.  Not all CHDK feature work. Read my posts over the past two months for details.

The basic  uBasic syntax works, but not some of the fancier ones. Has anybody checked which version of the syntax extensions were implemented? 

hha

*

Offline hha1

  • *
  • 26
Re: A1100 IS Porting thread
« Reply #382 on: 07 / August / 2010, 10:04:57 »


The basic  uBasic syntax works, but not some of the fancier ones. Has anybody checked which version of the syntax extensions were implemented? 

[/quote]

Here is a partial answer to my own question:

This motion detection scrip using the md_detect_motion function works on the A1100. It was written and tested on a Powershot S3IS with Fingalo's build v 119. The script also appear to work with Allbest build on many Powershot cameras. The syntax uses lower and upper case variables. This indicates the A1100 build pedigree. There are some curious side effects, e.g. every time the motion detection script is started the images are saved in a new folder.

hha




Re: A1100 IS Porting thread
« Reply #383 on: 18 / August / 2010, 08:17:04 »
For anyone with 1.00A firmware, dumping the firmware should be easy now with the discovery of Canon Basic.

I've uploaded the 1.00B firmware here if anyone's interested.


*

Offline fe50

  • ******
  • 3105
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: A1100 IS Porting thread
« Reply #384 on: 20 / August / 2010, 01:45:32 »
Hello & welcome, pawitp !

I've uploaded the 1.00B firmware here if anyone's interested.
Thx for this dump, i've added this to the chdkdumps backup repository ([1]) & updated the wikia links...

Re: A1100 IS Porting thread
« Reply #385 on: 26 / August / 2010, 07:51:56 »
For anyone with 1.00A firmware, dumping the firmware should be easy now with the discovery of Canon Basic.

I've uploaded the 1.00B firmware here if anyone's interested.

Ok, will try it in a few hours.

By the way, I was able to blink out 1.00A firmware, but decoder failed to work with my pcm file...

Re: A1100 IS Porting thread
« Reply #386 on: 26 / August / 2010, 14:32:29 »

Re: A1100 IS Porting thread
« Reply #387 on: 18 / September / 2010, 00:20:25 »
Is there a 1.00B firmware yet?


Re: A1100 IS Porting thread
« Reply #388 on: 20 / September / 2010, 00:24:35 »
Oops. I downloaded the 1.00B firmware. The file is PRIMARY.BIN. Question is what do I do with the file? It is not a CHDK file I expected. Can someone point me in the right direction please?

*

Offline reyalp

  • ******
  • 12111
Re: A1100 IS Porting thread
« Reply #389 on: 20 / September / 2010, 00:34:13 »
Oops. I downloaded the 1.00B firmware. The file is PRIMARY.BIN. Question is what do I do with the file? It is not a CHDK file I expected. Can someone point me in the right direction please?
This a dump of the 100B canon firmware, you would use it to make port. To find CHDK builds, look back through this thread. There are some that are reported to to work on 100b

Don't forget what the H stands for.

 

Related Topics