IXUS 120 porting thread

fvdk

146
Ixus 70 1.01b / 1.02a & Powershot A590is 1.01b

« on: 18 / August / 2010, 11:40:23 »

Advertisements

I just went to a camera shop and made a dump of the IXUS 120

http://drop.io/IXUS_120

I had no time to check the firmware version

Can someone confirm if this dump is OK?

Frans

Logged

c10ud

245

Re: IXUS 120 porting thread

« Reply #1 on: 18 / August / 2010, 11:52:51 »

seems ok too, DRYOS version 2.3, release #0039

Logged

fe50

3147
IXUS50 & 860, SX10 Star WARs-Star RAWs

Re: IXUS 120 porting thread

« Reply #2 on: 20 / August / 2010, 02:02:03 »

Quote from: fvdk on 18 / August / 2010, 11:40:23

I just went to a camera shop and made a dump of the IXUS 120
http://drop.io/IXUS_120

Quote from: c10ud on 18 / August / 2010, 11:52:51

seems ok too, DRYOS version 2.3, release #0039

--> IXUS 120 / SD940 1.01A, added to the chdkdumps backup repository ([1]) & updated the wikia links.

Logged

-->FIRMWARE DUMPS<-- * Manual * Lua * me

waterwingz

12138

Re: IXUS 120 (aka SD940) porting thread - first steps

« Reply #3 on: 28 / October / 2010, 20:06:59 »

Started playing with CHDK for the SD940 a few days ago. Have a dump of the rev C firmware and so far can confirm that the correct value for decoding is NEED_ENCODED_DISKBOOT=3

(as used in platform/<camera>/sub/<version>/makefile.inc and referenced in tools/dancingbits.c).

For reference, the decoding pattern is at address FFB61EC8 and consists of 8 x 32bit words : 2,5,0,4,6,1,3,7. The subroutine that actually does the decoding is located at FF9D5364.

One small step - hopefully more to come.

Logged

Ported : A1200 SD940 G10 Powershot N G16