S100 Firmware Dump - DryOS Development - CHDK Forum
« previous next »
Pages: [1] 2   Go Down

S100 Firmware Dump

  • 13 Replies
  • 15666 Views
*

Offline Digiman1946

  • *
  • 8
S100 Firmware Dump
« on: 22 / November / 2011, 13:27:02 »
Advertisements
Hello all,

Purchased an S100 about a month ago and have dumped the firmware for it. It can be found here;

http://www.mediafire.com/?ei770qsj911e61d

I hope I have done this correctly, if not, please let me know.

I haven't seen much activity on here regarding this camera, maybe someone will have an opportunity soon to work with the CHDK for it.

Thanks to all who contribute :)

Curt
Logged
*

Offline waterwingz

  • ******
  • 12139
    • Waterwingz
Re: S100 Firmware Dump
« Reply #1 on: 22 / November / 2011, 14:10:44 »
Quote
author=Digiman1946 link=topic=7125.msg76300#msg76300 date=1321986422
Purchased an S100 about a month ago and have dumped the firmware for it. It can be found here;

I hope I have done this correctly, if not, please let me know.
The code at the start of the dump looks correct.  Its interesting that the dump is 16M - that's double the size of the S95's image.  But I guess memory devices keep getting cheaper.

Assuming you used the Canon BASIC dumper, did you see the load address reported on your LCD ?  Maybe 0xFF000000 ?  If not,  there should be a file called CBDUMPER.LOG on your SD card that has that information.

Quote
I haven't seen much activity on here regarding this camera, maybe someone will have an opportunity soon to work with the CHDK for it.
Its a new camera - typically nothing happens until somebody with development skills and too much time on their hands gets involved.   Standard disclaimer here :  CHDK FAQ : My camera isn't ported yet

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Digiman1946

  • *
  • 8
Re: S100 Firmware Dump
« Reply #2 on: 22 / November / 2011, 14:24:22 »
I used the common_files.zip contents from the downloads page to obtain the dump along with instructions I found on the forums from philmoz.

I have the CBDUMPER.LOG file also on the card where the firmware is if it is needed. Just let me know & I can upload it also. File is very small, here are the contents:

Started
FF000000 dry
done

curt

Logged
*

Offline waterwingz

  • ******
  • 12139
    • Waterwingz
Re: S100 Firmware Dump
« Reply #3 on: 22 / November / 2011, 14:26:32 »
Quote from: Digiman1946 on 22 / November / 2011, 14:24:22
File is very small, here are the contents:

Started
FF000000 dry
done

Perfect - now all you need is a developer interested in the camera.  Unfortunately, that could take a while.

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Digiman1946

  • *
  • 8
Re: S100 Firmware Dump
« Reply #4 on: 22 / November / 2011, 14:45:04 »
Understood

thanx :)
Logged
*

Offline Jim

  • *
  • 32
Re: S100 Firmware Dump
« Reply #5 on: 20 / December / 2011, 14:34:39 »
Well ... it is that time of year again when it gets dark and cold in the Northern hemisphere....perhaps a developer is interested in digging out a beta build for the Canon S100.....certainly a top camera with loads of new fun potential....
Logged
*

Offline waterwingz

  • ******
  • 12139
    • Waterwingz
Re: S100 Firmware Dump
« Reply #6 on: 20 / December / 2011, 14:38:15 »
Quote from: Jim on 20 / December / 2011, 14:34:39
....perhaps a developer is interested in digging out a beta build for the Canon S100.....
I'm afraid that pretty much depends on a developer stepping forward who has some software skills,  access to an S100 and lots of spare time.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline The Chief

  • *
  • 1
Re: S100 Firmware Dump
« Reply #7 on: 10 / March / 2012, 12:04:25 »
Logged
*

Offline fe50

  • ******
  • 3147
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: S100 Firmware Dump
« Reply #8 on: 11 / March / 2012, 08:05:49 »
Quote from: The Chief on 10 / March / 2012, 12:04:25
1.01A FW version dump:
http://www.mediafire.com/?wfhwq3p4n5pnw8d
Thanks for the dump.
Quote from: fe50 on 11 / March / 2012, 08:02:11
Added the
  • S100 1.01A
full 16MB dump (dumped with cBasic udumper) by The Chief from this forum post to the box.net/chdk repository.
Logged
*

Offline Jasperbuurman

  • *
  • 3
Re: S100 Firmware Dump
« Reply #9 on: 01 / July / 2012, 10:31:57 »
I've purchased an S100 and I'm trying to dump the firmware (which is 1.01B) using cBasic dumper. But I'm having difficulties running the script on de S100. It doesn't seem to responde to the 'FUNCTION' button.
Logged
Pages: [1] 2   Go Up
« previous next »
 

Related Topics