S100 porting thread

msl

1280
A720 IS, SX220 HS 1.01a

Re: S100 porting thread

« Reply #150 on: 19 / July / 2012, 18:23:34 »

Advertisements

Firmware version 101b was added in changeset 2001.

Thanks goes to grep.

The S100 101b should be available soon as download.

msl

Logged

CHDK-DE: CHDK-DE links

waterwingz

12139

Re: S100 porting thread

« Reply #151 on: 19 / July / 2012, 22:03:07 »

Quote from: msl on 19 / July / 2012, 18:23:34

Thanks goes to grep.

I was trying to understand how the Unix "grep" command was useful in porting to another firmware version for the S100. Then I realized that grep is a user nickname on the CHDK-DE forum.

Logged

Ported : A1200 SD940 G10 Powershot N G16

hqasem

19

Re: S100 porting thread

« Reply #152 on: 20 / July / 2012, 07:15:27 »

You guys Rock! Thank you c10ud, grep msl and everyone who made this possible. CHDK now runs on my S100 Firmware 1.01B.

Logged

pdw911

14

Re: S100 porting thread

« Reply #153 on: 20 / July / 2012, 07:59:17 »

I must be an idiot....I do what with the changeset...I appologize for my ignorance

Logged

pdw911

14

Re: S100 porting thread

« Reply #154 on: 20 / July / 2012, 08:04:10 »

Thanks...I should have checked...the "B" version is posted

Thanks to all

As I understand, I should unzip directly to SD card, correct???

Logged

hqasem

19

Re: S100 porting thread

« Reply #155 on: 20 / July / 2012, 08:19:17 »

Quote from: pdw911 on 20 / July / 2012, 08:04:10

As I understand, I should unzip directly to SD card, correct???

I believe it doesn't really make a difference. Just make sure:

If your SD card is between 4GB and 32GB (inclusive), format it in camera
Make the card bootable (e.g. using EOScard)
Copy "DISKBOOT.BIN" from the CHDK zip file into the SD card's root directory
Lock the SD card (slide the lock switch)
Place the SD card in your S100, keep holding the On button for couple of seconds, and CHDK will start.

Logged

pdw911

14

Re: S100 porting thread

« Reply #156 on: 20 / July / 2012, 10:46:40 »

Thanks...I understood that CHDK might not start with "on" button....that you would have to initialize with movie button first and then 1/2 press shutter button to switch to camera mode..but apparently you have it working with "on" button

I appreciate the input

Logged

hqasem

19

Re: S100 porting thread

« Reply #157 on: 20 / July / 2012, 12:43:31 »

Quote from: pdw911 on 20 / July / 2012, 10:46:40

that you would have to initialize with movie button first

That doesn't work for me. I can, however, start the camera by holding the "Play" button for 2 seconds.

Quote from: pdw911 on 20 / July / 2012, 10:46:40

but apparently you have it working with "on" button

That is correct. Just "keep holding" the On button for 2 seconds. With a non-CHDK card, a single click of the On button will start the camera.

« Last Edit: 20 / July / 2012, 17:00:55 by hqasem »

Logged

pdw911

14

Re: S100 porting thread

« Reply #158 on: 22 / July / 2012, 08:24:53 »

Thanks to all who developed this..works very well with power on button

Logged

aroudaki

1

Re: S100 porting thread

« Reply #159 on: 29 / July / 2012, 02:21:44 »

Hi

Thanks for the firmware.
I have a 101A.
1. I Formatted my 16Gb memory with the camera.
2. Then used EOSCard to enable the boot
3. Copied the CHDK to the root of the card.
4. Lock the card, and place back the card
5. Turn on the camera

Now, when I press and hold PLAY button, the CHDK does not show up.

Is there any other trick I am not aware of?

Thanks

Logged