IXUS 132 / ELPH 115 IS Porting Thread - page 4 - DryOS Development - CHDK Forum
« previous next »
Pages: 1 2 3 [4] 5 6 7 8 9 ... 12   Go Down

IXUS 132 / ELPH 115 IS Porting Thread

  • 110 Replies
  • 63720 Views
*

Offline nafraf

  • *****
  • 1308
Re: IXUS 132 / ELPH 115 IS Porting Thread
« Reply #30 on: 01 / March / 2014, 14:02:45 »
Advertisements
@irwanLaw.com
I sent you a PM with the link to a test version. To load CHDK, only bootable sd-card method is supported.

Please try it and report.
Logged
*

Offline srsa_4c

  • ******
  • 4451
Re: IXUS 132 / ELPH 115 IS Porting Thread
« Reply #31 on: 01 / March / 2014, 14:11:57 »
@irwanLaw.com

- Do NOT use CHDK releases made for a different camera. They will NOT work. The Ixus132 needs its own CHDK build.

- Try EOSCard to make the card bootable (beware, "ML" and "EOS_DEVELOP" are for DSLR cameras).

- nafraf has created a blind port for this model, the source code is available from his repository. If you want to help with the development, you'll need the ixus132_elph115 directories inside the loader and platform directories. You'll need to copy these into a fresh copy of the CHDK trunk code.
To build CHDK, you probably want to use the latest version of this utility (note that it will stop working properly in a few weeks due to changes on assembla.com).

@nafraf
thx.
Logged
*

Offline irwanLaw.com

  • *
  • 24
Re: IXUS 132 / ELPH 115 IS Porting Thread
« Reply #32 on: 01 / March / 2014, 14:37:59 »
ok.

thx nafraf & srsa_4c
Logged
*

Offline irwanLaw.com

  • *
  • 24
Re: IXUS 132 / ELPH 115 IS Porting Thread
« Reply #33 on: 01 / March / 2014, 15:26:58 »
Quote from: nafraf on 01 / March / 2014, 14:02:45
@irwanLaw.com
I sent you a PM with the link to a test version. To load CHDK, only bootable sd-card method is supported.

Please try it and report.

ok, after i put the yours files to ixus132, then press PLAY, its running, loading CHDK logo very fast, and then, change to this (see attachment):

PS0: 0x21xxxx <= running text change every second..
PS1: 0x3xxxxx <= running text change every second..
PS2: 0x4207fdf (FIXED)

MEM: 0x18142406 (fixed)
FB: 0
ZB: 0
USB : 0

-
What next step?

Thx.
-
EDIT:

ok its, running, but the LCD blink every time i press CHDK menu..

shutter speed can up to 1/1000s
« Last Edit: 01 / March / 2014, 15:37:10 by irwanLaw.com »
Logged
*

Offline nafraf

  • *****
  • 1308
Re: IXUS 132 / ELPH 115 IS Porting Thread
« Reply #34 on: 01 / March / 2014, 15:50:11 »
Quote from: irwanLaw.com on 01 / March / 2014, 15:26:58
PS0: 0x21xxxx <= running text change every second..
PS1: 0x3xxxxx <= running text change every second..
PS2: 0x4207fdf (FIXED)
Those strings appear because I use them for kbd debug during the port. They will be removed later.
Some functions have been already tested, take a look on gon's test report.

Please test if zebra is working, I made some changes today.
Logged
*

Offline irwanLaw.com

  • *
  • 24
Re: IXUS 132 / ELPH 115 IS Porting Thread
« Reply #35 on: 01 / March / 2014, 16:10:07 »
Quote from: nafraf on 01 / March / 2014, 15:50:11
Quote from: irwanLaw.com on 01 / March / 2014, 15:26:58
PS0: 0x21xxxx <= running text change every second..
PS1: 0x3xxxxx <= running text change every second..
PS2: 0x4207fdf (FIXED)
Those strings appear because I use them for kbd debug during the port. They will be removed later.
Some functions have been already tested, take a look on gon's test report.

Please test if zebra is working, I made some changes today.

ixus132 show warning:

"A camera error was detected
Will shutdown automatically
Restart camera
E26"

and then POWER OFF by it self

the LCD is flicker/blinking, battery to fast drop using this CHDK, i have to charges and have to sleep for a while, 4AM in the morning here...

i'll try again after battery is full.

thx.
« Last Edit: 01 / March / 2014, 16:46:08 by irwanLaw.com »
Logged
*

Offline irwanLaw.com

  • *
  • 24
Re: IXUS 132 / ELPH 115 IS Porting Thread
« Reply #36 on: 02 / March / 2014, 09:59:47 »
Quote from: irwanLaw.com on 01 / March / 2014, 16:10:07
Quote from: nafraf on 01 / March / 2014, 15:50:11
Quote from: irwanLaw.com on 01 / March / 2014, 15:26:58
PS0: 0x21xxxx <= running text change every second..
PS1: 0x3xxxxx <= running text change every second..
PS2: 0x4207fdf (FIXED)
Those strings appear because I use them for kbd debug during the port. They will be removed later.
Some functions have been already tested, take a look on gon's test report.

Please test if zebra is working, I made some changes today.

ixus132 show warning:

"A camera error was detected
Will shutdown automatically
Restart camera
E26"

and then POWER OFF by it self

the LCD is flicker/blinking, battery to fast drop using this CHDK, i have to charges and have to sleep for a while, 4AM in the morning here...

i'll try again after battery is full.

thx.

i think; the error because i did wrong setting of CHDK, i not found menu S/Tv, A/Av to try make photos drop water like this http://chdk.wikia.com/wiki/Samples:_High-Speed_Shutter_%26_Flash-Sync

still reading...

http://chdk.wikia.com/wiki/CHDK_firmware_usage/AllBest#Extra_Photo_Operations

any clue?

Thx

EDIT:
NB:
Quote
Those strings appear because I use them for kbd debug during the port. They will be removed later.
Some functions have been already tested, take a look on gon's test report.

Please test if zebra is working, I made some changes today.

A. zebra: if half object to dark; the LCD going shows alots red dots, the focus center show exclamation mark with yellow circle, and the LCD is flicker/blinking, that what i means last night...

B. video parameters: [ Don't / Time / KB/s / Both ]
Refresh Rate  (~sec) = 1 - 20

show remain time to recording = YES
the right side show= MEM: 0x406
-
show KB/s = YES
the right side show=0x18042406
-
both  = YES
the right side show MEM: 0x400

C. PTP = Mall Function  / Can't connect to Computer via USB, ixus132 crash
« Last Edit: 02 / March / 2014, 12:31:31 by irwanLaw.com »
Logged
*

Offline waterwingz

  • ******
  • 12139
    • Waterwingz
Re: IXUS 132 / ELPH 115 IS Porting Thread
« Reply #37 on: 02 / March / 2014, 10:40:41 »
Quote from: irwanLaw.com on 02 / March / 2014, 09:59:47
still reading...http://chdk.wikia.com/wiki/CHDK_firmware_usage/AllBest#Extra_Photo_Operations
I'm not sure why you are reading that - it's about five years obsolete.

The current version of that documentation is here :  http://chdk.wikia.com/wiki/CHDK_1.2.0_User_Manual#Enhanced_Photo_Operations
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline irwanLaw.com

  • *
  • 24
Re: IXUS 132 / ELPH 115 IS Porting Thread
« Reply #38 on: 02 / March / 2014, 11:01:48 »
Quote from: waterwingz on 02 / March / 2014, 10:40:41
Quote from: irwanLaw.com on 02 / March / 2014, 09:59:47
still reading...http://chdk.wikia.com/wiki/CHDK_firmware_usage/AllBest#Extra_Photo_Operations
I'm not sure why you are reading that - it's about five years obsolete.

The current version of that documentation is here :  http://chdk.wikia.com/wiki/CHDK_1.2.0_User_Manual#Enhanced_Photo_Operations

owh... LOL, thx, result from google search engine >,<
-
Reporting:

A. zebra: if half object to dark; the LCD going shows alots red dots, the focus center show exclamation mark with yellow circle, and the LCD is flicker/blinking, that what i means last night...

B. video parameters: [ Don't / Time / KB/s / Both ]
Refresh Rate  (~sec) = 1 - 20

show remain time to recording = YES
the right side show= MEM: 0x406
-
show KB/s = YES
the right side show=0x18042406
-
both  = YES
the right side show MEM: 0x400

C. PTP = Mall Function  / Can't connect to Computer via USB, ixus132 crash
« Last Edit: 02 / March / 2014, 12:32:16 by irwanLaw.com »
Logged
*

Offline srsa_4c

  • ******
  • 4451
Re: IXUS 132 / ELPH 115 IS Porting Thread
« Reply #39 on: 02 / March / 2014, 13:03:41 »
Quote from: irwanLaw.com on 02 / March / 2014, 09:59:47
C. PTP = Mall Function  / Can't connect to Computer via USB, ixus132 crash
After you crash the camera with this, switch it on again, and make a romlog: navigate to "miscellaneous stuff" -> "debug parameters" -> "save rom crash log" in the CHDK menu. After you have done this, get the file named "romlog.log" you find on the card and attach it here.


To test zebra: enable it, point the camera to something that will cause overexposure (light bulb for example) and press the shutter button halfway down. The overexposed region should blink. If what you see is different, take a picture from the LCD screen and attach it here.

About nafraf's debug displays: it's possible that they do not show anything new, you don't need to watch them, unless you are asked to do so. You might be able to switch some of them off by unticking "miscellaneous stuff" -> "debug parameters" -> "show misc. values".


If you can find a way to reproduce the E26 error you mentioned earlier, let us know. CHDK should not cause issues like that.
« Last Edit: 02 / March / 2014, 13:05:43 by srsa_4c »
Logged
Pages: 1 2 3 [4] 5 6 7 8 9 ... 12   Go Up
« previous next »
 

Related Topics