CHDK Forum
CHDK Development => Feature Requests => Topic started by: igoor777 on 03 / July / 2009, 08:09:31
-
Hello! :xmas :xmas
I have Canon SX10IS with firmware vers. 1.0.1.0!? How do I install and which a chdk when there are only versions 1.0a, b, c. .. Please help me and sorry for bad english. :'( :'(
Best Regards!
Igor
-
hi igoor777 !
Welcome to the forum !
1.0.1.0 is not your real firmware version, read here how to find your real firmware version:
http://chdk.wikia.com/wiki/FAQ#Q._How_can_I_get_the_original_firmware_version_number_of_my_camera.3F (http://chdk.wikia.com/wiki/FAQ#Q._How_can_I_get_the_original_firmware_version_number_of_my_camera.3F)
You might also want to read the other FAQs, that will help you get CHDK up & running as quickly as possible.
cheers,
wim
-
hi igoor777 !
Welcome to the forum !
1.0.1.0 is not your real firmware version, read here how to find your real firmware version:
http://chdk.wikia.com/wiki/FAQ#Q._How_can_I_get_the_original_firmware_version_number_of_my_camera.3F (http://chdk.wikia.com/wiki/FAQ#Q._How_can_I_get_the_original_firmware_version_number_of_my_camera.3F)
You might also want to read the other FAQs, that will help you get CHDK up & running as quickly as possible.
cheers,
wim
thank you bro, but I have one big problem. Finally I know the version. F.version is 1.01B. After downloading file for this version I made everything according to instructions but isn`t work. Starts to run the firmware upgrade, the lamp little works only once , illuminates the sign chdk forum once and is turned off. What should I do? tnx
--
Please sorry for English...
-
the lamp little works only once , illuminates the sign chdk forum once and is turned off. What should I do? tnx
So the camera is still powered on ? Then all is ok !
-> press the Shutter button to switch to the record mode
-> to enter the CHDK <Alt> mode (the CHDK menu) press the PRINT / SHORTCUT button (left from the viewfinder),
-> to exit the <Alt> mode press PRINT again
-
the lamp little works only once , illuminates the sign chdk forum once and is turned off. What should I do? tnx
So the camera is still powered on ? Then all is ok !
-> press the Shutter button to switch to the record mode
-> to enter the CHDK <Alt> mode (the CHDK menu) press the PRINT / SHORTCUT button (left from the viewfinder),
-> to exit the <Alt> mode press PRINT again
this is it...thank you...only to understand what is what and great.... :))) seeya