Has anyone tried to partition a 8Gb SDHC card into 2 4gb spaces? Would I be able to format the 1st partition in FAT16 mode and force it to be bootable?
Most cameras has multipartition support, this is used by thousands of CHDK users...
-->
http://chdk.wikia.com/wiki/Bootable_SD_cardDoes anyone know if I can change the location of where CHDK will write the images to the 2nd partition?
With a multipartition setup, CHDK use the first partition only for start up, then the 2nd partition stores all data.
I have been using 4Gb Non-HC SD cards formatted at FAT16 for my Powershot S80 fine but my SD cards are started to die and replacements are hard to find.
BUT: Your S80 DOES NOT support SDHC cards, so you're limited to 4GB SD cards !This is a limitation of the camera hardware / Canon firmware, CHDK can't change this.