Porting request for G3X, SX710, SX620, SX540 or SX720

tim dif

6

Re: Porting request for G3X, SX710, SX620, SX540 or SX720

« Reply #10 on: 09 / February / 2017, 07:00:49 »

Advertisements

Quote from: reyalp on 08 / February / 2017, 22:55:04

Quote from: tim dif on 08 / February / 2017, 20:00:42
Unfortunately, the cameras I listed in my original post are the only ones which satisfy the first five criteria I mentioned.
Or adjust your criteria... for example, the SX60 is only 16MP, but should otherwise meet all the criteria and be a better camera overall than low end models like the SX540 and SX620.

EDIT: Please ignore this. I have found it in a testing thread.

Hi Reyalp

Thank you very much for your reply.

I have actually looked for the SX60 port in the downloads section of the CHDK website but I can't find it. I have looked in both the 1.4.1 and 1.5.0 sections.

Kind regards

Tim

« Last Edit: 09 / February / 2017, 07:26:00 by tim dif »

Logged

Ant

509

Re: Porting request for G3X, SX710, SX620, SX540 or SX720

« Reply #11 on: 09 / February / 2017, 08:18:50 »

Quote from: tim dif on 09 / February / 2017, 06:48:28

I can't see what harm I am doing just making a polite request.

One more polite but useless topic.(excepting Google Advertisements, if you see it)

« Last Edit: 09 / February / 2017, 08:27:46 by Ant »

Logged

Christian72D

7

Re: Porting request for G3X, SX710, SX620, SX540 or SX720

« Reply #12 on: 11 / September / 2019, 07:16:03 »

Quote from: Ant on 09 / February / 2017, 08:18:50

Quote from: tim dif on 09 / February / 2017, 06:48:28
I can't see what harm I am doing just making a polite request.
One more polite but useless topic.(excepting Google Advertisements, if you see it)

Why is it USELESS?

The G3X is a phantastic camera, many more low end cameras will be supported.
So i think the question is legitimate. I also wonder why nobody is working on this camera. I would do it if I could.
More than uploading a firmware is not what i can do.

Maybe to expansive for most people...

Logged

waterwingz

12139

Re: Porting request for G3X, SX710, SX620, SX540 or SX720

« Reply #13 on: 11 / September / 2019, 15:47:05 »

Quote from: Christian72D on 11 / September / 2019, 07:16:03

I also wonder why nobody is working on this camera. I would do it if I could.

A camera gets ported when somebody with the necessary skill and knowledge volunteers to do the port. That usually also means they have access to the actual camera, typically because they own one. There is no schedule for this and no list of volunteers looking for such a project.

Logged

Ported : A1200 SD940 G10 Powershot N G16