Is there any progress on the "no motion" option?
I'm not sure if anybody asked this.
can you exactly specify what do you wish?
I would suggest you to post it here -
MX3's (motion detection) Builds or there -
Feature Requests. . . and any advice for someone wanting to start the trial and error process with an A570IS.
it is camera independent feature. once made it will work on all cameras.
you can use dirty workaround
set triggerdelay, timeout, threshold
and check if t<1
thats will be no motion during specified timeout
of course there will be dead time periods ( due to trigger delay )
ie if you chose timeout 2 seconds and 1 second trigger delay and something constantrly moves on the scene you will lost 50% of time on preparation
I'm not sure....
Waiting for your comments