New releaser - Allbest. His build. - page 3 - CHDK Releases - CHDK Forum

New releaser - Allbest. His build.

  • 139 Replies
  • 130494 Views
*

Offline hydrogen

  • *
  • 20
  • Canon A570 IS 1.01A
Re: New releaser - Allbest. His build.
« Reply #20 on: 07 / December / 2007, 13:42:46 »
Advertisements
I've tried the build a bit and it works on both my A570 ...

What build works with the A570?

Re: New releaser - Allbest. His build.
« Reply #21 on: 07 / December / 2007, 13:57:20 »
I've tried the build a bit and it works on both my A570 ...

What build works with the A570?
Oops.  Actually only tried it on my S2.  Was thinking of Ewavr's build.

Re: New releaser - Allbest. His build.
« Reply #22 on: 07 / December / 2007, 14:06:53 »
"ISO800 +2EV = ISO3200? (ISO +1EV = 1600)" ?

hmmm I don`t all undestand
if I change ISO I see biger Noise
this is REAL ISO 1600 (but why noise is like ISO 800?) or this is only equivalent
 ISO 800 +1EV ?
in 710 - ISO 1600 is max
I can`t see difference between 1600 and 3200



 

Re: New releaser - Allbest. His build.
« Reply #23 on: 07 / December / 2007, 14:21:05 »
why I can`t see diferrence between 1600 and 3200 I UNDESTAND  :)

but I don`t this:
"if I change ISO I see biger Noise
this is REAL ISO 1600 (but why noise is like ISO 800?) or this is only equivalent
ISO 800 +1EV ?"


Re: New releaser - Allbest. His build.
« Reply #24 on: 07 / December / 2007, 17:39:27 »
It doesn't appear that "AllBest" created a build for the A570 cameras yet (or might not be able to?). So just browse the CHDK Wikia Downloads page to find the version that you like best. You've got three flavor to choose from, EWAVR's, Fingalo's, and Microfunguy's. Read the info on each one. There's also a little overview on the main page in the "Special Builds" section at the bottom of the main CHDK page.
Good Night, My Friends! :) That's true. Night in russia now:)
Some time later. May be next week will be ready builds for all other cameras....
Thank you!

Re: New releaser - Allbest. His build.
« Reply #25 on: 07 / December / 2007, 18:42:50 »
I think there is some kind of unwanted interaction between Zebra mode and the DOF calculator (tested on S3 IS):

1) setting the 'Zebra mode' (any) shows the "old" Depth-of-Field 'R1/R2' and Hyperfocal distance 'DOF/HYP' too.
2) setting 'Zebra mode style 1-2' or 'Solid' causes the DOF calculator to malfunction and to display wrong numbers, even the new additional values like 'real ISO' etc. are not updated anymore.

Unsetting the 'Zebra mode', all get back to normality.

Can anybody try the same settings, just to confirm the presence of this malfunction?
Thanks.
R.

*

Offline emu

  • *
  • 47
  • A710is - Fingalo's build
Re: New releaser - Allbest. His build.
« Reply #26 on: 07 / December / 2007, 19:35:33 »
why I can`t see diferrence between 1600 and 3200 I UNDESTAND  :)

but I don`t this:
"if I change ISO I see biger Noise
this is REAL ISO 1600 (but why noise is like ISO 800?) or this is only equivalent
ISO 800 +1EV ?"

if the exposure (e.g. 1/60) is the same, but the image is brighter than with ISO 800 -> higher ISO
at least thats my conclusion... :P

*

dennis_hs

Re: New releaser - Allbest. His build.
« Reply #27 on: 08 / December / 2007, 08:27:06 »
Yeah baby...   :o  Finally a great release for my G7   :lol

Thanks AllBest !!!


Merry Christmas all ..   :xmas


Re: New releaser - Allbest. His build.
« Reply #28 on: 08 / December / 2007, 12:12:06 »
I tested ISO in A630:

[ Orginal fotos in 2048x1536 ]

1. 1/15s F8.0 ISO 800 Ev (override => MIN [2.82] )



2. 1/15s F8.0 ISO 1200 Ev (override => MIN [2.82] )

Canon PowerShot A630 + CHDK Firmware

*

Offline hydrogen

  • *
  • 20
  • Canon A570 IS 1.01A
Re: New releaser - Allbest. His build.
« Reply #29 on: 08 / December / 2007, 19:04:47 »
Is the reason there is no build for A570 because that particular model doesn't compile?

I tried compiling from sources for A570 101a and get the following compile error.

Code: [Select]
-> stubs_entry.S
CAUTION! 'stubs_entry.S' is not uptated due to target firmware binary not found!
stubs_entry.S -> stubs_entry.o
lib.c -> lib.o
stubs_entry_2.S -> stubs_entry_2.o
capt_seq.c -> capt_seq.o
capt_seq.c: In function `tv_override':
capt_seq.c:48: error: structure has no member named `tv_override'
capt_seq.c:48: error: structure has no member named `tv_override'
capt_seq.c:48: error: too few arguments to function `shooting_set_tv96_direct'
D:\CHDK\gcc\bin\gmake[5]: *** [capt_seq.o] Error 1
D:\CHDK\gcc\bin\gmake[4]: *** [all-recursive] Error 1
D:\CHDK\gcc\bin\gmake[3]: *** [all-recursive] Error 1
D:\CHDK\gcc\bin\gmake[2]: *** [all-recursive] Error 1
gmake[1]: *** [all-recursive] Error 1
gmake: *** [batch-zip] Error 2

 

Related Topics