New releaser - Allbest. His build. - page 6 - CHDK Releases - CHDK Forum supplierdeeply

New releaser - Allbest. His build.

  • 139 Replies
  • 130493 Views
Re: New releaser - Allbest. His build -ISO override problem on S3 IS
« Reply #50 on: 11 / December / 2007, 06:46:06 »
Advertisements
I am testing the new  Allbest software on a S3 IS (good work , Allbest!).
I have observed also the shutdown problem, i.e. the camera is stucked suddenly and then shuts down.
Investigating further I have discovered that this occurs when I use the ISO override option.
It is a rather unpredictable behaviour. Because of this I am restrained in using ISO override option.
Hi, Dan!
Can u try it in autoiso mode? Now i'm ocupied with correction of this part of the code. however here there is no any problem with my a620. May be some particular qualities of s3....

*

Offline Kalli

  • **
  • 51
  • A620, SX10 IS
Re: New releaser - Allbest. His build.
« Reply #51 on: 11 / December / 2007, 08:03:43 »
Hi, Allbest!
I'm trying to translate the english.lng file and can't find the texts: >Clear override values on start<, >Show canon overexposure value<, >Show parameter data<(below "Show PropCases").

While the text inside the "Benchmark" can be translated, I can't find the text inside "Memory-Browser".

THANKS for your great job!!! :D

Kalli
« Last Edit: 11 / December / 2007, 08:25:50 by Kalli »

Re: New releaser - Allbest. His build.
« Reply #52 on: 11 / December / 2007, 08:43:04 »
Kalli
Hi, Kalli!
Today i'll publish new version of English.lng
Thank u :)

Re: New releaser - Allbest. His build.
« Reply #53 on: 11 / December / 2007, 09:30:04 »
rossig
Hi, Rossig!
Key words for search:
GetBvResult -> PROPCASE_BV
GetAvResult -> PROPCASE_AV
GetTvResult -> PROPCASE_TV
GetDeltaGainResul ->  PROPCASE_DELTA_SV
GetSvResult -> PROPCASE_SV
GetSvFixResult -> PROPCASE_SV_MARKET
GetTargetDistanceResult -> PROPCASE_SUBJECT_DIST1

Under PROPCASE_USER_AV and so on I understand user seted Av value (in manual modes). You already found this values ;-)
Thank U!


Re: New releaser - Allbest. His build.
« Reply #54 on: 11 / December / 2007, 10:00:20 »
   AutoISO:    (actual ISO used = BaseISO * AutoISO / 100)
Hellow, Barney!
That's true. I use this relation in my calculations... :)
I found that a higher ISO is written to AutoISO in Maker Notes, but it doesn't reflect the selected overridden ISO accurately.

Canon write so named "MARKET" Iso values in exif. So necessary to observe for corresponding value on the display (miscellaneous values -> Show market Iso) ;-)
replacing standard EXIF fields with 3 new ones from Maker Notes ...
Already exists Some decision for ISO:
http://aeropic.free.fr/H&B/AUTO_ISO_patcher/


« Last Edit: 11 / December / 2007, 10:02:08 by Allbest »

Re: New releaser - Allbest. His build.
« Reply #55 on: 11 / December / 2007, 11:12:54 »
:) Explanation of Market Iso. There are two values of senititvity In Canon Firmware. I call it "market" and "real" ISO. Market ISO (for my opinion in understaning of this situation) is same ISO, that Canon writes on the box. Some kind of advertising...  But! Exposure is calculated from second ISO(I see it!). I call it as "real" ISO value . It's only my opinion in explanation of existence of two kind of ISO in firmware... Do u understand me? :) May be u can invent more fiendly name for this property?  :xmas
« Last Edit: 11 / December / 2007, 11:19:34 by Allbest »

Re: New releaser - Allbest. His build.
« Reply #56 on: 11 / December / 2007, 11:40:25 »
Or am I confusing things by thinking that the true values have nothing to do with the EXIF info in the Maker Notes section?
Yes. Real ISO values is  great mystery of Canon :-X  :D

Re: New releaser - Allbest. His build.
« Reply #57 on: 11 / December / 2007, 14:10:21 »
Hi, everybody!
I use the new Allbest build, and so far, it is great! BUT I have noticed that when using the motion detection script, the delay between two consecutives pictures are taken is longer that with Fingalo's build. Have anyone else noticed? If so, is it possible to make things a bit faster?
Oh yes, I noticed the same with the remote control!


Re: New releaser - Allbest. His build.
« Reply #58 on: 11 / December / 2007, 14:33:02 »
Thanks Barney for your answer!
Well, I really did'nt imagine that...well, I will use different builds on different memory cards.
Thanks!

Re: New releaser - Allbest. His build.
« Reply #59 on: 11 / December / 2007, 15:18:18 »
I read this http://chdk.wikia.com/wiki/CHDK_firmware_usage/AllBest
but there is no info what is this:

menu scripting parameters/

Exposure control (no flash)
Exposure control (no flash)->

??

 

Related Topics