New releaser - Allbest. His build. - page 8 - CHDK Releases - CHDK Forum  

New releaser - Allbest. His build.

  • 139 Replies
  • 108594 Views
Re: New releaser - Allbest. His build.
« Reply #70 on: 12 / December / 2007, 03:26:08 »
Advertisements
#define PROPCASE_USER_TV                   264
 #define PROPCASE_TV                       262
 #define PROPCASE_USER_AV                     26
 #define PROPCASE_AV                        23
 #define PROPCASE_MIN_AV                      25
 #define PROPCASE_SV                        246
 #define PROPCASE_DELTA_SV                  79
 #define PROPCASE_SV_MARKET                 247
 #define PROPCASE_BV                        34
 #define PROPCASE_SUBJECT_DIST1             245
 #define PROPCASE_SUBJECT_DIST2             65
Thank u, Rossig! My next build will be with a570 :) Did u test some new features?

Re: New releaser - Allbest. His build.
« Reply #71 on: 12 / December / 2007, 03:59:30 »
3. on S3 build 100a-10 of Dec. 9 2007:
   
    shooting Video:   with zebra on: with default parameters  + histogram on
    half pressing the shutter brings both zebra & histogram into view
    while videorecording. 
This is priceless.
    BUT, the zebra shows completely BELOW  the over-exposed part of the image
   
    when Video is not recorded, Zebra shows spot on.
Thank u! I'll try to fix this bug

*

Offline hailstorm

  • *
  • 38
  • Canon S3 IS, Marumi 0.5 X Lens,Hoya CPL+CHDK
    • My pic page ;)
Re: New releaser - Allbest. His build.
« Reply #72 on: 12 / December / 2007, 05:27:07 »
256 "Exposure control (no flash)"
257 "Exposure control (no flash)->"
So I suspect that it's some as-yet unimplemented new feature from AllBest,
Hi, Woodsman!
That's true! Sorry!
And further... ALL features of Fingalo (THANKS!!!) are included in my build (and remote control -too) ;-)

is there something for 350D?????????????/ :xmas

Re: New releaser - Allbest. His build.
« Reply #73 on: 12 / December / 2007, 08:25:41 »
Hi Allbest! First of all, THANKS for the GREAT job you did, and you do!!!

I am using your latest build on my A630. Everthing is working fine, but there are some minor bugs.
When I shoot at an aperture of 2.8 in raw mode, and when I press the shutter button briefly, the camera does not save the raw picture. To do so, I need to keep my finger on the shutter button a bit longer. It only happens at wide open.
Also, when shooting with the remote control (or sometimes using motion detection), and when turning off the noise reduction, the camera will aplly the noise reduction anyway. (I mean at 800 iso) This doesn't happen when shooting w/o the remote.

Once again, thanks for your job!!
« Last Edit: 12 / December / 2007, 11:09:16 by A630Lover »


Re: New releaser - Allbest. His build.
« Reply #74 on: 12 / December / 2007, 15:37:58 »

I'm not sure if this is the right place for bug reports but here goes. When I use "get_far_limit" in a script it will always return the same value regardless of the F-stop.

Camera: S3
software version: allbest-s3is-100a-10.zip

Here is the relevant bit of code

do
   set_focus F
   print "dist ",F
   shoot
   get_far_limit F
until F >= G

As can be seen, the far limit of the current shot is used as the focus distance of the next shot.

If I shoot a sequence at F2.8 the DoF is small and there should be many exposures compared to the same sequence at F8.0. But they turn out to be identical in focus distances and number.

Cheers,
Angus

Re: New releaser - Allbest. His build.
« Reply #75 on: 12 / December / 2007, 17:33:40 »
Thank u, Rossig! My next build will be with a570 :) Did u test some new features?

Hi Allbest,
I made a quick test with Your sources during my search for props and the only serious problem found was related to all operations with ISO.
In Your site I was unable to find the latest version (You published new executables on 9/12/2007), i'm testing build 7 (File date=7/12/2007).

I noticed that You created a repository in assembla svn and I hope that You will soon upload Your latest sources for a 'deep' testing.

Thanks

Re: New releaser - Allbest. His build.
« Reply #76 on: 12 / December / 2007, 17:34:23 »
Thank u, Rossig! My next build will be with a570  Did u test some new features?
Hi Allbest,
I made a quick test with Your sources during my search for props and the only serious problem found was related to all operations with ISO.
In Your site I was unable to find the latest version (You published new executables on 9/12/2007), i'm testing build 7 (File date=7/12/2007).

I noticed that You created a repository in assembla svn and I hope that You will soon upload Your latest sources for a 'deep' testing.
EDIT:
Sorry, but this second post was due to connectivity problems.........  :(

Thanks
« Last Edit: 12 / December / 2007, 17:43:45 by rossig »

Re: New releaser - Allbest. His build.
« Reply #77 on: 13 / December / 2007, 03:17:44 »
I'm not sure if this is the right place for bug reports but here goes. When I use "get_far_limit" in a script it will always return the same value regardless of the F-stop.
If I shoot a sequence at F2.8 the DoF is small and there should be many exposures compared to the same sequence at F8.0. But they turn out to be identical in focus distances and number.
Cheers,
Angus
Hi, AngusinAlberta!
Did u run this script in Manual Focus mode?


Re: New releaser - Allbest. His build.
« Reply #78 on: 13 / December / 2007, 03:30:21 »
Are you familiar with the english saying, "There's method to my madness (craziness)." :D
Joker? We need u here ;-)

Perhaps that could be dealt with in the future and you (or someone) could provide a toggle to choose between a decimal and fractional shutter-speed system
It's good idea. I'll try to realize it :-)

Re: New releaser - Allbest. His build.
« Reply #79 on: 13 / December / 2007, 03:56:03 »
Hi Allbest,
I made a quick test with Your sources during my search for props and the only serious problem found was related to all operations with ISO.
Hellow, rossig!
I'm now working under improvement of this part of the code. May be it will help us:)
I noticed that You created a repository in assembla svn and I hope that You will soon upload Your latest sources for a 'deep' testing.
Today or tomorrow I'll publish my sources on Assembla
Thank u!
« Last Edit: 13 / December / 2007, 04:57:33 by Allbest »

 

Related Topics