IXUS 255 IS/ELPH 330 IS porting thread

airpain

Re: IXUS 255 IS/ELPH 330 IS porting thread

« Reply #10 on: 19 / February / 2014, 04:41:31 »

Advertisements

Thanks for checking!

Logged

mpetroff

Re: IXUS 255 IS/ELPH 330 IS porting thread

« Reply #11 on: 20 / February / 2014, 18:23:45 »

I've started a port based on the IXUS140 / ELPH130IS port:
https://github.com/mpetroff/chdk-elph330hs

So far, I've found the I/O LED address, 0xc022c020, and have gotten debug code that flashes the LED working. The boot process currently works through creating the spy task, but I have not been able to get the camera to fully boot, and the screen never turns on. As I've never done a port before, this might take a while.

Logged

nafraf

1305

Re: IXUS 255 IS/ELPH 330 IS porting thread

« Reply #12 on: 20 / February / 2014, 19:13:33 »

Hi mpetroff,
For stubs_entry_2.S address:
MakeDirectory_Fut = mkdir
finish_shutdown = TurnOffE1_FW

Patch in attachment.

stubs_entry_2.patch (0.74 kB - downloaded 24 times.)

Logged

mpetroff

Re: IXUS 255 IS/ELPH 330 IS porting thread

« Reply #13 on: 22 / February / 2014, 16:59:42 »

I still haven't made any progress in getting the camera to boot, even with all of the task hooks commented out. I have been able to follow the boot process through line 457 of boot.c, which never returns. I think the issue might be with a call to the CreateController function, but I'm not really sure. Any pointers someone more experienced could give me for getting the camera to boot would be appreciated. Thanks.

Logged

srsa_4c

3940

Re: IXUS 255 IS/ELPH 330 IS porting thread

« Reply #14 on: 22 / February / 2014, 18:49:47 »

Quote from: mpetroff on 22 / February / 2014, 16:59:42

I still haven't made any progress in getting the camera to boot, even with all of the task hooks commented out. I have been able to follow the boot process through line 457 of boot.c, which never returns.

Are you sure about the play/rec mode related code at the start of sub_FF00038C_my()? If not, choose a working DIGIC 5 port, and find the equivalent part(s) in your firmware.

Logged

Menu jumping/flickering on M10?

mpetroff

Re: IXUS 255 IS/ELPH 330 IS porting thread

« Reply #15 on: 22 / February / 2014, 20:25:35 »

Quote from: srsa_4c on 22 / February / 2014, 18:49:47

Quote from: mpetroff on 22 / February / 2014, 16:59:42
I still haven't made any progress in getting the camera to boot, even with all of the task hooks commented out. I have been able to follow the boot process through line 457 of boot.c, which never returns.
Are you sure about the play/rec mode related code at the start of sub_FF00038C_my()? If not, choose a working DIGIC 5 port, and find the equivalent part(s) in your firmware.

That fixed it; thanks! I had updated the values, but I left in a offset, which the ELPH330 doesn't have. After rechecking the firmware, I removed the offset, and the camera now boots with the task hooks commented out.

Logged

airpain

Re: IXUS 255 IS/ELPH 330 IS porting thread

« Reply #16 on: 24 / February / 2014, 20:36:13 »

I don't mean to slow progress on this, but I noticed that the port that was started is with a camera that is based on DIGIC 4. I noticed that there is another port based on the 320HS, which I'm wondering if it'll be a closer fit, since it's based on DIGIC 5, which the 330HS has? Granted, it's an alpha build, as well as my being clueless to this process.

Would it be because this camera isn't touch screen like the 320? Spec-wise, I did notice the 110HS which uses DIGIC 5 and no touch screen is also in alpha build. How does one decide which port to start with?

As I don't know anything, I apologize in advance if I'm stepping on any toes.

« Last Edit: 24 / February / 2014, 20:43:27 by airpain »

Logged

reyalp

11998

Re: IXUS 255 IS/ELPH 330 IS porting thread

« Reply #17 on: 24 / February / 2014, 23:09:24 »

Quote from: airpain on 24 / February / 2014, 20:36:13

I don't mean to slow progress on this, but I noticed that the port that was started is with a camera that is based on DIGIC 4. I noticed that there is another port based on the 320HS, which I'm wondering if it'll be a closer fit, since it's based on DIGIC 5, which the 330HS has? Granted, it's an alpha build, as well as my being clueless to this process.

Digic version makes very little difference (for digic II-digic V)

Quote

How does one decide which port to start with?

Generally, similar release date, a mature port, and similar hardware are good things to look for, but it doesn't actually matter a whole lot, all the camera specific stuff needs to be done no matter what.

Logged

Don't forget what the H stands for.

airpain

Re: IXUS 255 IS/ELPH 330 IS porting thread

« Reply #18 on: 25 / February / 2014, 02:00:21 »

Good to know, thanks for the info!

Logged

mpetroff

Re: IXUS 255 IS/ELPH 330 IS porting thread

« Reply #19 on: 25 / February / 2014, 23:07:59 »

I currently have power button detection working and the boot process almost working. The camera boots, "memory card locked" disappears, and the LED flashes, but the camera then crashes instead of showing the CHDK splash screen. I assume this is due to an address I haven't found yet (bitmap_buffer or viewport_buffers?).

Logged