Turning Flash off disables saving RAW files - page 2 - RAW Shooting and Processing - CHDK Forum

Turning Flash off disables saving RAW files

  • 18 Replies
  • 9024 Views
*

Offline McG

  • *
  • 7
Re: Turning Flash off disables saving RAW files
« Reply #10 on: 28 / June / 2013, 19:41:44 »
Advertisements
I just realized that the problem doesn't have to do with manually turning off the flash.

Even if the flash is set to auto, but the picture doesn't need the flash, then it will take the picture, but it won't write a RAW file.

In case there's a setting that I'm missing, I've attached the settings as a text file.

*

Offline McG

  • *
  • 7
Re: Turning Flash off disables saving RAW files
« Reply #11 on: 29 / June / 2013, 00:26:24 »
I believe I figured out the problem.
I have to half-press the shutter first, and then full-press to take the picture.
Apparently this doesn't need to be done if the flash is going to fire automatically, but is required in bright light or daylight.

*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: Turning Flash off disables saving RAW files
« Reply #12 on: 29 / June / 2013, 00:36:48 »
I believe I figured out the problem.
I have to half-press the shutter first, and then full-press to take the picture.
Apparently this doesn't need to be done if the flash is going to fire automatically, but is required in bright light or daylight.

That's usually an indication of a problem in the override code for image capture (capt_seq.c).

Fixing it usually requires a lot of trial and error, testing various versions of the placement of the override hooks.

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: Turning Flash off disables saving RAW files
« Reply #13 on: 29 / June / 2013, 00:49:54 »
I believe I figured out the problem.
I have to half-press the shutter first, and then full-press to take the picture.
Apparently this doesn't need to be done if the flash is going to fire automatically, but is required in bright light or daylight.

Try this version - I've added a fix that has worked for other cameras with a similar problem.

Phil.
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)

*

Offline McG

  • *
  • 7
Re: Turning Flash off disables saving RAW files
« Reply #14 on: 29 / June / 2013, 01:04:20 »

Try this version - I've added a fix that has worked for other cameras with a similar problem.

Phil.


Yes, that works.
Thanks very much!

Re: Turning Flash off disables saving RAW files
« Reply #15 on: 10 / July / 2013, 07:23:17 »
Similar subject was being discussed at yahoo answers last week. I can post the link if needed.
Good free example of essays here http://www.prime-essay.com

*

Offline McG

  • *
  • 7
Re: Turning Flash off disables saving RAW files
« Reply #16 on: 12 / July / 2013, 09:26:41 »
Similar subject was being discussed at yahoo answers last week. I can post the link if needed.

Hi CamKrist, please post the link. I'd be curious to see what they came up with.

Re: Turning Flash off disables saving RAW files
« Reply #17 on: 12 / July / 2013, 09:53:33 »
Similar subject was being discussed at yahoo answers last week. I can post the link if needed.
Hi CamKrist, please post the link. I'd be curious to see what they came up with.
Yahoo answers is not a great place for technical advice on CHDK.

There is even an "expert" there using the nickname fhotoace who has been warning people for years that CHDK overwrites the Canon firmware and that you have to pay Canon to reinstall their original firmware :
http://in.answers.yahoo.com/question/index?qid=20130329102416AAVpYqf
http://answers.yahoo.com/question/index?qid=20081007090856AAa1kbu
http://www.opensourcescript.net/answers/question.php?qid=20121224000144AAJCmro
« Last Edit: 12 / July / 2013, 09:56:40 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

Re: Turning Flash off disables saving RAW files
« Reply #18 on: 24 / April / 2014, 08:32:36 »
Has this fix now been included in all versions as I still seem to be getting the same problem with the 1.02a version. Would it be possible to have a version  that solves the problem with this as well?

 

Related Topics


SimplePortal © 2008-2014, SimplePortal