flash without shutter? - Script Writing - CHDK Forum

flash without shutter?

  • 2 Replies
  • 2519 Views
flash without shutter?
« on: 04 / August / 2013, 02:19:57 »
Advertisements
Is there a way to fire either the built in flash, hot shoe flash, or both without taking a photo on a canon s5is?
how about setting the flash output power?

Re: flash without shutter?
« Reply #1 on: 04 / August / 2013, 02:37:18 »
Is there a way to fire either the built in flash, hot shoe flash, or both without taking a photo on a canon s5is?
No.  Or I probably would have suggested it here : http://chdk.setepontos.com/index.php?topic=10486

Quote
how about setting the flash output power?
use this :
http://chdk.wikia.com/wiki/Script_commands#set_config_value
to set this :
http://chdk.wikia.com/wiki/CHDK_1.2.0_User_Manual#Manual_Flash_.2B_Power
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline reyalp

  • ******
  • 14126
Re: flash without shutter?
« Reply #2 on: 04 / August / 2013, 04:02:59 »
Is there a way to fire either the built in flash, hot shoe flash, or both without taking a photo on a canon s5is?
No.
Not directly with script commands, but it has been done see http://chdk.setepontos.com/index.php?topic=2655.0

The functions described by ewavr in http://chdk.setepontos.com/index.php?topic=2655.msg25065#msg25065 are available as eventprocs (registered by 'Capture.Create' on a540), through creating a struct requires some gymnastics with lua strings or AllocateMemory and poke.

You can also fire the flash by poking MMIOs on many cameras. On a540, poke(0xc0220074,0x46) does the trick. Many people have discovered this while searching for LEDs... However, I would give this a very strong "try at your own risk" warning. If it is possible to damage hardware using CHDK, messing with this is probably a good candidate.
Don't forget what the H stands for.

 

Related Topics


SimplePortal © 2008-2014, SimplePortal