Wireless investigations - page 6 - General Discussion and Assistance - CHDK Forum  

Wireless investigations

  • 55 Replies
  • 14165 Views
*

Offline reyalp

  • ******
  • 11863
Re: Wireless investigations
« Reply #50 on: 27 / December / 2013, 22:06:00 »
Advertisements
Attached shows two Ixus 240 when inter-connected by Wi-fi
I don't understand. This is feature of the factory firmware, there is no reason it should not work.

The subject of this thread is how to control the wireless from CHDK, and how to control the camera using  the CHDK PTP extension over PTP/IP.

This
Quote
edit 1: The camera also seems to drop connection after some fairly short period of time.
refers to using the camera menu to connect to a PC, and then connecting to the camera using chdkptp instead of the normal windows software.

Don't forget what the H stands for.

Re: Wireless investigations
« Reply #51 on: 27 / December / 2013, 22:14:24 »
I don't understand. This is feature of the factory firmware, there is no reason it should not work.

The subject of this thread is how to control the wireless from CHDK, and how to control the camera using  the CHDK PTP extension over PTP/IP.
Quote

Currently scripts don't/won't run from CHDK PTP so this was ONLY an Demo/Attempt to See/Observe the Inter-connected Ixus 240 Wi-Fi cameras behave with CHDK also running on one of them.

The basic idea was to use/test/demo the ("feature of the factory firmware")  Canon's "Consumer" firmware feature's and the use of the CHDK Wi-Fi camera as a spy. But in this case no scripts can be run.

H_H
« Last Edit: 27 / December / 2013, 22:38:48 by Hardware_Hacker »

*

Offline reyalp

  • ******
  • 11863
Re: Wireless investigations
« Reply #52 on: 27 / December / 2013, 22:38:28 »
Compile Errors-3268 when appling patch.

./lib/core/libcore.a(ptp.o): In function `handle_ptp':
ptp.c:(.text+0x7f8): undefined reference to `get_tywbuf_data'
ptp.c:(.text+0x836): undefined reference to `put_tyread_char'

Did you define #define CAM_CONSOLE_LOG_ENABLED         1
in your cameras platform_camera.h?
Don't forget what the H stands for.

Re: Wireless investigations
« Reply #53 on: 27 / December / 2013, 23:19:13 »
Re:- Did you define #define CAM_CONSOLE_LOG_ENABLED         1
in your cameras platform_camera.h?

Re-Compiled & Error Logs Attached

H_H
« Last Edit: 28 / December / 2013, 00:39:32 by reyalp »


*

Offline reyalp

  • ******
  • 11863
Re: Wireless investigations
« Reply #54 on: 28 / December / 2013, 00:29:28 »
Re-Compiled & Error Logs Attached
You can just post the relevant error in text in your post, no need for attachments. Anyway, it looks like it's the same error as before.

It tells you which functions are not defined, you need to figure out why they aren't defined.

Not having the #define CAM_CONSOLE_LOG_ENABLED 1 in the platform_camera.h for the camera you are trying to build will cause this error, but if you didn't successfully patched your source, it could give you the same error. The functions mentioned in the error should appear in platform/generic/wrappers.c
Don't forget what the H stands for.

*

Offline reyalp

  • ******
  • 11863
Re: Wireless investigations
« Reply #55 on: 28 / December / 2013, 00:39:51 »
Re-Compiled & Error Logs Attached
Your attached html has a hidden iframe at the bottom which is detected as an attack site. I removed the attachment.

edit:
My turn to post a screenshot
« Last Edit: 28 / December / 2013, 01:49:54 by reyalp »
Don't forget what the H stands for.

 

Related Topics