Can't get Camera to load CHDk from Card( Elph 110HS (IXus 125) - General Help and Assistance on using CHDK stable releases - CHDK Forum

Can't get Camera to load CHDk from Card( Elph 110HS (IXus 125)

  • 5 Replies
  • 1864 Views
Can't get Camera to load CHDk from Card( Elph 110HS (IXus 125)
« on: 11 / October / 2013, 14:53:40 »
Advertisements
Hi Folks,
I was able to download the correct CHDK  for fimware 100.d Put it onto the root of my card. I did it with STICK and with direct download and unpack. When I put the card in the camera. The camera doesn't recognize the CHDK. In other words no change.
In fact when I tried to get the version of the firmware using the  ver.req  written onto the card it didnt respond to that either. I got the firmware version from STICK.
Any insights? Ive been all over the Website and haven't found out what is up? HAS some one actually done this and if so what did they find?

Thanks in advance for any clue

(  Elph 110HS (IXus 125) MAC OSX 10.8. 4

Re: Can't get Camera to load CHDk from Card( Elph 110HS (IXus 125)
« Reply #1 on: 11 / October / 2013, 15:01:14 »
Did you put the SD card lock switch into the "Locked" position?
Ported :   A1200    SD940   G10    Powershot N    G16

Re: Can't get Camera to load CHDk from Card( Elph 110HS (IXus 125)
« Reply #2 on: 11 / October / 2013, 16:57:43 »
Yes I tried it in the locked position and the unlocked position. Neither worked .

Re: Can't get Camera to load CHDk from Card( Elph 110HS (IXus 125)
« Reply #3 on: 11 / October / 2013, 17:20:21 »
I did it with STICK and with direct download and unpack.
STICK should work correctly.  If you are directly downloading and installing yourself from a Mac then you probably want to look at this :

http://chdk.wikia.com/wiki/FAQ/Mac#Still_Having_Trouble.3F
http://chdk.wikia.com/wiki/FAQ/Mac

Quote
Any insights? Ive been all over the Website and haven't found out what is up?
Here's the only up-to-date and accurate internet resource :
http://chdk.wikia.com/wiki/Prepare_your_SD_card

Quote
HAS some one actually done this and if so what did they find?
Done what?  Loaded CHDK ? 
Ported :   A1200    SD940   G10    Powershot N    G16


*

Offline zeno

  • *****
  • 887
Re: Can't get Camera to load CHDk from Card( Elph 110HS (IXus 125)
« Reply #4 on: 11 / October / 2013, 18:22:50 »
Reading your post I'm not sure if you actually used STICK to prepare the card - it sounds as though you downloaded and unpacked the build yourself. If you did just use STICK to do the whole download and card preparation then it definitely should have made a bootable card (and completely avoided the Mac problems that WaterWingz mentions).

Could you run STICK again and if it still doesn't work then email the sticklog.txt file that you'll find in the =same directory as STICK to me (daveATzenoshrdlu.com). I may be able to see what's going wrong.
A570, S100, Ixus 127
Author of ASSIST, STICK, WASP, ACID, SDMInst, LICKS, WICKS, MacBoot, UBDB, CFGEdit

Re: Can't get Camera to load CHDk from Card( Elph 110HS (IXus 125)
« Reply #5 on: 18 / October / 2013, 04:14:19 »
CHDK  for fimware 100.d
Put it onto the root of my card. recognize the CHDK.
Any insights? Ive been all over the Website and haven't found out what is up? HAS some one actually done this and if so what did they find?

Thanks in advance for any clue


Hi all,

See Here:- http://chdk.setepontos.com/index.php?topic=8085.msg104336#msg104336

I now have a Ixus 125-100d an ebay Cheapie, it appears to me to have a similar problem and
some others, probably due to incomplete camera CHDK porting and/or camera testing.

My Ixus 125-100e and Ixus 125-101a seem to work well but they also have some problems.

More complete details soon.

See Here:- http://chdk.setepontos.com/index.php?topic=8085.msg106490#msg106490

H-H
« Last Edit: 21 / October / 2013, 04:18:36 by Hardware_Hacker »

 

Related Topics