I'm using it successfully with USB Shot Control set to One Shot with a Pixhawk Autopilot. However, I'm unable to retract the lens. I see you've implemented a couple of features that will almost work (PWM and return camera to playback mode). Can the script be set so that I use multiple PWM values to, extend lens, take picture, retract lens?
QuoteI will try to make a fresh copy of CHDK and the script in the evening.It will not hurt to try this but I don't think there is anything wrong with your CHDK installation or how the script is installed.
I will try to make a fresh copy of CHDK and the script in the evening.
I told you, when I press the review button, then I switch over to another picture....Pressing review key works again ... and so on.
If so, what happens when you turn that stuff off using the Canon setup menu and just have the camera stay in shooting mode all the time?
I usually have two seconds review time. When I switch that to OFF in Canon menu than there is no difference in the script behavior.
The behavior of the Playback key is strange. Do you also use it as the CHDK <ALT> key by any chance?
What happens if you just start the script and let it sit there - don't press any buttons. Does it take a picture every so often? Or just sit there hung forever?
What does the LCD console say in that case?
If you exit via the Menu button you can go to the CHDK Miscellaneous Stuff menu -> Console -> Display last console to see what was on the console during the test.
Can you ... record video of the operation
There was a lot of keyboard stuff in the last weeks, maybe something changed?
But why other scripts work?
Quote What happens if you just start the script and let it sit there - don't press any buttons. Does it take a picture every so often? Or just sit there hung forever?The picture stays foreever, no additional pictures.Quote What does the LCD console say in that case?nothing, there isn't any overlay.
Quote from: exposeIT on 12 / April / 2015, 05:36:03There was a lot of keyboard stuff in the last weeks, maybe something changed? That's a very interesting thought! The changes are all in CHDK 1.4.0 - which is what you are using. What happens if you load CHDK 1.3.0 into your camera and run that?
Started by Jim
Completed and Working Scripts
Started by nadavofi
« 1 2 »
Started by Benny_H88
« 1 2 3 »
Started by davefolts
Creative Uses of CHDK
Started by GlobalSurvey
General Help and Assistance on using CHDK stable releases