The very 1st time I tried it last night I was getting a waiting for USB input signal I think I re-started the camera and then it worked.Today I can't get it to respond at all and nothing has changed. I've tried unplugging the USB, re-plugging it in, staring the camera with the USB in and without it in and it just sits and says waiting for USB input signal.I tried switching it to PWM in case that makes a difference and again nothing ...... any ideas???
My pictures though are awful and very unclear, I really wanted to get a decent depth of field so set my target AV at 7.1 and shutter at 1/800 which is throwing the ISO up to around 800, maybe that's the issue, I'll wind the AV back to 4.0 and the shutter speed up and see what effect.
Sorry I've been a bit quiet, just after I posted the last post I thought I'd take the other UAV up with the GoPro camera with a non fish eye lens in the same lighting conditions as I just done the shots with the S110 to get a direct comparison ..... I was hoping the Canon would improve on the GoPro shots and I had a complete fly away over the roof of my house and beyond some trees so I had no idea where it went heading towards fields opposite.
The pictures are blurry, very blurry and add insult to injury before the UAV decided it had a will of it's own and ran away I got a couple of pics for comparison and they're much clearer than the Canon.
The gimbal for the S110 is a servo driven one
The pictures are blurry, very blurry and add insult to injury before the UAV decided it had a will of it's own and ran away I got a couple of pics for comparison and they're much clearer than the Canon.I've attached the log and a pic from each.
I have a built a UAV specially for a mission but in order to actually do the mission I need to get the shot interval of my Canon S110 under 1.5s. Can anybody tell me how can that be done?
Started by Jim
Completed and Working Scripts
Started by nadavofi
« 1 2 »
Started by Benny_H88
« 1 2 3 »
Started by davefolts
Creative Uses of CHDK
Started by GlobalSurvey
General Help and Assistance on using CHDK stable releases