To help find the problem, would you use the Load default param values menu option in the Script menu to reset all your parameters, change only the Total Shot (0=infinite) setting to [ 3 ] , and then run the script and report what happens?
7. IS Mode Off (may not be necessary for KAP but should be off for UAV)
On the wiki page you say:Quote7. IS Mode Off (may not be necessary for KAP but should be off for UAV) Why would you disable IS (that is image stabilisation, right?) for use on a UAV. I would think the contrary would result in better images. Is a camera without IS better for UAV? or is it only for optical vs. for digital?
What camera model would you recommend?
Quote from: waterwingz on 04 / September / 2015, 20:32:01To help find the problem, would you use the Load default param values menu option in the Script menu to reset all your parameters, change only the Total Shot (0=infinite) setting to [ 3 ] , and then run the script and report what happens?No difference. Camera takes 3 shots and hangs.
2015Sep05 01:55:18 Logger : log file updated.
As I was running an older chdk version (chdk 1.3.0-3416), I upgraded to the latest version (4228) and tested again.
the camera takes almost continously pictures: taking an writing the pictures to memory card is indeed not very fast on my little camera
One thing that has changed between v3.5 and v3.6 is that the script has become a little larger. I did a quick scan of the porting thread for the ixus220_elph300hs and it does not seem to have a lot of memory compared to some other cameras. Let's try a "loader" script - a small script that loads a larger script such that it takes up a lot less memory. This will no longer be needed in CHDK 1.4.0 (when it finally gets released) but will work for 1.3.0. Simply install the loader script like you would any other script on your SD card (in the same folder as the kap_uav.lua script) and run it.
Btw. is there any drawbacks using this loader?
Started by Jim
Completed and Working Scripts
Started by nadavofi
« 1 2 »
Started by Benny_H88
« 1 2 3 »
Started by davefolts
Creative Uses of CHDK
Started by GlobalSurvey
General Help and Assistance on using CHDK stable releases