Hey again, I'm having this issue wioth my 125hs. running with pixhawk on continuous mode. Some pictures are out of focus while others are OK, distance between cam and ground are the same. How is that possible? Since continoues mode keeps the initial focus.
According to an online EXIF reader SD seems the same for all images (65.53m). Which makes sense since it's in continuous mode.Please take a look at my attached script. Particularly out of focus images are : IMG_0001 IMG_0004 IMG_0009 IMG_0011 IMG_0012...
I did those tests, and seems images from a tripod mount are good.
I turned off focus at infinity because it made all the pics blurry, might have to tweak the distance in the script.
I'm leaning towards a vibration issue myself, weird thing is cameras are mounted on anti vibration bobbins and all props are balanced well.
I'm now gonna test with softer bobbins and see if that makes a difference. Pictures however look like theyre out of focus and not fuzzy or blurred out like you would expect from vibration,on the other hand vibes might move the optics around changing the focus.
After dozens of tests to figure out why my pics started to get blurry I found the culprit...
However after 3353mm I get -1 as return value, any clue why that could be ? Works fine for 0-3353mm
Started by Jim
Completed and Working Scripts
Started by nadavofi
« 1 2 »
Started by Benny_H88
« 1 2 3 »
Started by davefolts
Creative Uses of CHDK
Started by GlobalSurvey
General Help and Assistance on using CHDK stable releases