G16 firmware dump - Firmware Dumping - CHDK Forum supplierdeeply

G16 firmware dump

  • 17 Replies
  • 18015 Views
G16 firmware dump
« on: 23 / November / 2013, 11:19:37 »
Advertisements
ftp://becherer.selfhost.eu/Canon G16 - Firmware Dump/G16.7z
Start address is FC020000
Sorry for not having the firmware version.
I dumped it from the local photography store...

Re: G16 firmware dump
« Reply #1 on: 23 / November / 2013, 11:24:18 »
« Last Edit: 23 / November / 2013, 11:40:25 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

Re: G16 firmware dump
« Reply #2 on: 24 / November / 2013, 06:18:45 »
Hi,

I just removed the blanks in the directory name
and restarted my router.
The address is now:
ftp://becherer.selfhost.eu/CanonG16FirmwareDump/G16.7z

Greetings,

Harald

Re: G16 firmware dump
« Reply #3 on: 01 / December / 2013, 17:40:27 »
For those who are experiencing time outs I got a new address:
http://ubuntuone.com/2HRxXQ2I3Dx9QEpSptlQP4

I'll defenitly buy the G16 around Christmas and I'll be awailable for heavy testing;-)
My coding experience is apparently not sufficient to find the right way in IDA.
I dont have a license for decompiling to C were I would be more familliar.

A CHDK supporting this camera whould be an extrem benefit for remote controlling
it from my quadrocopter;-)

Greetings,

Harald


*

Offline reyalp

  • ******
  • 12065
Re: G16 firmware dump
« Reply #4 on: 01 / December / 2013, 19:50:27 »
I'll defenitly buy the G16 around Christmas and I'll be awailable for heavy testing;-)
My coding experience is apparently not sufficient to find the right way in IDA.
I dont have a license for decompiling to C were I would be more familliar.
As noted in the sx280 thread http://chdk.setepontos.com/index.php?topic=9992.0 Digic 6 uses a new ARM CPU architecture, so a fair bit of work will be required beyond the normal porting tasks. This is not impossible, but it will require someone with good programming skills a fair bit of work.

I have verified that your dump is a thumb2 firmware like the sx280. Firmware version is 100h, DryOS version is R52

Note if you buy a different G16 later, the firmware version may be different.
Don't forget what the H stands for.

Re: G16 firmware dump
« Reply #5 on: 04 / January / 2014, 17:22:22 »
Seems like a start from scratch :-(
May the force be with you and all!
Now I've got my G16, same firmware version.
I could test any thing any time.
The thread for the SX280 seems to be more active, so I'll wait.
Greetings,
Harald

*

Offline fe50

  • ******
  • 3105
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: G16 firmware dump
« Reply #6 on: 23 / March / 2014, 05:48:24 »
Since there are some DIGIC6 dumps available now & it looks like the 64MB dumps are ok/useful i've added those dumps to the CHDK P&S FW dumps repository:


As soon as 'full 64MB' dumpes for the SX270 & SX280 are available i'll add them, too...

Re: G16 firmware dump
« Reply #7 on: 20 / April / 2014, 06:58:33 »
https://sites.google.com/site/xuload/uploads/G16-101a.7z

The firmware from my G16.
Version 101A
I checked the version number via CameraVersion.
For some reason ver.req doesn't work.


*

Offline fe50

  • ******
  • 3105
  • IXUS50 & 860, SX10 Star WARs-Star RAWs
    • fe50
Re: G16 firmware dump
« Reply #8 on: 21 / April / 2014, 05:03:01 »
Hello & welcome - thx for the dump !
Added the
  • G16 1.01A
full 64MB dump by xureality from this forum post to the CHDK P&S FW dumps repository.

*

kitemonkee

Re: G16 firmware dump
« Reply #9 on: 22 / April / 2014, 11:17:28 »
here is my Canon PowerShot G16 firmware dump:
https://drive.google.com/file/d/0B9hf-atVx4uwQk9raFBfa3BPS28/edit?usp=sharing
ver.req didn't work, CameraVersion says it is version: 1.00 rev 8.00

i wish i was be able to contribute more...
 :(

 

Related Topics