I'm trying to generate the CSV file for S100 using s100-101a-1.2.0-3317.
I got following messages:no file A/CHDK/SCRIPTS/gen/cnf_osd.luano file A/CHDK/LUALIB/gen/cnf_osd.luaHad a look in MF_test.lua. I also need gen/cnf_core which I couldn't find either.
In the instruction, it said: Lua native calls must be enabled to use SS.MFOnWhat does that mean?
Quote from: bigboss97 on 20 / January / 2014, 06:15:51no file A/CHDK/SCRIPTS/gen/cnf_osd.luano file A/CHDK/LUALIB/gen/cnf_osd.luaThis means you do not have CHDK installed corrrectly. There are missing files. What installation process did you follow?
no file A/CHDK/SCRIPTS/gen/cnf_osd.luano file A/CHDK/LUALIB/gen/cnf_osd.lua
Make the SD bootable and unzip all files to SD card. It was a while ago and I can't remember the link.
If you downloaded the "SMALL" version from the autobuild download page then you did not get all the necessary files. I'm not really sure why we maintain a small version - it mostly causes problems when people who do not understand the difference use it.
I'm using s100-101a-1.2.0-3323-full_BETA.zip which has the LUALIB and SCRIPTS directories, but not the 2 missing files.
Quote from: bigboss97 on 21 / January / 2014, 01:07:04I'm using s100-101a-1.2.0-3323-full_BETA.zip which has the LUALIB and SCRIPTS directories, but not the 2 missing files.That explains it. The scripts mentioned are specific to the 1.3 development builds from http://mighty-hoernsche.de/trunk/waterwingz test script also requires 1.3 to bypass the set_focus checks.
Check here to see if test results are needed for your camera : Focus Test XRef Table neededDownload and install the lastest development version of CHDK 1.3.0 for your camera from here : CHDK 1.3.0 Download Page (rev 3303 or higher). If you have an SD card with CHDK installed already, simply copy the files & folders from the CHDK distribution to that card, preserving the folder structure.a2200-100d-1.3.0-3337-full_ALPHAnote : don't forget the unlock/lock of the sd card note: 100b doesn't bootDownload this script : MF_test.lua and install in the script directory (/CHDK/SCRIPTS ) on your SD card okImportant Note : enable Lua Native Calls in the CHDK Miscellaneous Stuff menu.okSet sure your camera into "P" mode rather than "AUTO" mode,ok with ServoAF and ContinuousAF disabled in the Canon shooting menu (if possible)how ?Make sure your camera is not in MF (manual focus) or AFL (auto focus lock) modes. how ?Run the script with the default parameters while watching the progress on your camera's LCD screen.test 1 passedtest 2 launched then crashdisablingset_focusset_aflockpresssw1allows the test to runKnowing which tests crash is just as important as knowing which fail or pass. If the script stops and the camera hangs or shuts down at any point, you can disable the test it was trying to run at that point with the Script menu. Then restart the test. This might happen with more than one test - keep disabling the tests until the script can complete. Knowing which tests crash is just as important as knowing which fail or pass. [IMG]Test results are stored in a file in the root directory of your SD card. The file name will be your camera model and the extension .csv (e.g. a495.csv )(e.g. a1200.csv ) here.file attached
Started by kwf
General Discussion and Assistance
Started by dzsemx
Started by kmboise
Hello, I'm a NEWBIE - HELP!! (Newbies assistance, User Guides and thank you notes)
Started by Sdack
« 1 2 3 »
General Discussion and Assistance
Started by pigeonhill
« 1 2 »
General Help and Assistance on using CHDK stable releases