SX170 porting - page 9 - DryOS Development - CHDK Forum
« previous next »
Pages: 1 ... 4 5 6 7 8 [9] 10 11 12 13 14 ... 27   Go Down

SX170 porting

  • 266 Replies
  • 100538 Views
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SX170 porting
« Reply #80 on: 21 / August / 2014, 11:03:32 »
Advertisements
Quote from: Garden on 21 / August / 2014, 10:27:59
The version you sent me is showing the CHDK splash window, shows a message "Test version expired". I can start a limited menu . At least it booted. What I notice is that firmware version is 100A. I am using 101A.
I need 101A to compare with the frmware I generated.
Please read and understand this wiki page before doing any more posting here :

http://chdk.wikia.com/wiki/Prepare_your_SD_card

You are missing some fundamental understanding that you will need before going any farther.

For example,  the CHDK version you MUST use on your camera needs to match the actual firmware version of your camera.  You can't just pick a random version to use or use the one with the highest version number thinking its the latest.  If your camera has firmware version 1.00a then you need to use the CHDK version for 1.00a.

Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline BinMaster

  • *
  • 31
Re: SX170 porting
« Reply #81 on: 21 / August / 2014, 11:27:19 »
the current version of the camera is 100a, there is no higher firmware to sx1701is.
try missing.

nafraf « Reply #5 on: 02 / July / 2014, 08:25:37 »
http://chdk.setepontos.com/index.php?topic=11164.0
« Last Edit: 21 / August / 2014, 12:12:05 by BinMaster »
Logged
*

Offline Garden

  • **
  • 60
Re: SX170 porting
« Reply #82 on: 21 / August / 2014, 12:34:48 »
Thanks guys but i only use the nafrat souce tree and thought that the 101A in his tree was the most complete. Iveill try 100A
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SX170 porting
« Reply #83 on: 21 / August / 2014, 16:05:22 »
Quote from: Garden on 21 / August / 2014, 12:34:48
Thanks guys but i only use the nafrat souce tree and thought that the 101A in his tree was the most complete. Iveill try 100A
Did you read my previous post about firmware versions?  You can't just try different firmware versions and expect them to work!  You have to use the one that matches the firmware version of your camera.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Garden

  • **
  • 60
Re: SX170 porting
« Reply #84 on: 21 / August / 2014, 18:45:42 »
waterwingz

Yes I read it.

I am just trying to compile and run  this source tree that you sent me \sx170is\platform\sx170is\sub\101a\ after the patch you kindly applied. I could succesfully compile but I had the problem when try to run. I think there is a misunderstanding because I downloaded the source tree from janeoyuri post and you applied the necessary patch.

I am not getting any firmware from other camera at random and try to use in the SX170.
If I can compile and generate a working version I can help testing it because I have worked with CHDK for several other cameras. And I really want to make CHDK run in my SX170.
 
Thank you so much for your attention.
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SX170 porting
« Reply #85 on: 21 / August / 2014, 18:56:11 »
Quote from: Garden on 21 / August / 2014, 18:45:42
I am just trying to compile and run  this source tree that you sent me \sx170is\platform\sx170is\sub\101a\ after the patch you kindly applied. I could succesfully compile but I had the problem when try to run.
That source tree is for cameras with firmware version 1.01A.   Your camera ( based on previous posts ) has 1.00a.    You can confirm that using the tools available at the link I suggested you read.   The ACID tool listed there will tell you.

You have been asked multiple times to confirm what firmware version your camera has.  We are not just doing that because we like asking that question.  There is a reason we ask.  Can you now guess what that is ?

If your camera does in fact contain firmware version 1.00A then there is no point building a CHDK release designed for cameras with firmware 1.01A.   As I've said at least once,  the firmware version that CHDK is built for must match the firmware version in your camera.

I only provided a 1.01A source tree as that is what you asked for. 
« Last Edit: 21 / August / 2014, 19:02:43 by waterwingz »
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline BinMaster

  • *
  • 31
Re: SX170 porting
« Reply #86 on: 21 / August / 2014, 22:18:13 »
Tree construction is needed CHDK for 1.00a.
garden, which version has the camera you have?
you are creating a limited menu for the version 1.00a.
Logged
*

Offline Garden

  • **
  • 60
Re: SX170 porting
« Reply #87 on: 22 / August / 2014, 08:10:03 »
waterwingz and BinMasdter

I used Stick and it says  100a as both of you told me.

Thanks
Logged
*

Offline janeoyuri

  • *
  • 15
Re: SX170 porting
« Reply #88 on: 24 / August / 2014, 18:00:57 »
Good Morning garden.
I think the development was stopped by an error, apparently.
Logged
*

Offline Garden

  • **
  • 60
Re: SX170 porting
« Reply #89 on: 25 / August / 2014, 06:41:52 »
Good morning  janeoyuri

What kind of error?
Can you send  me your development source tree so that I can compile and test SX170is and try to help?
Thanks
Logged
Pages: 1 ... 4 5 6 7 8 [9] 10 11 12 13 14 ... 27   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal