Partition not working properly after booting to CHDK - General Help and Assistance on using CHDK stable releases - CHDK Forum
« previous next »
Pages: [1]   Go Down

Partition not working properly after booting to CHDK

  • 4 Replies
  • 4915 Views
*

Offline Lastb0isct

  • *
  • 9
Partition not working properly after booting to CHDK
« on: 12 / March / 2014, 18:11:02 »
Advertisements
Hi All,

I followed the instructions on how to setup CHDK on a Mac, got everything pushed over to the SD Card with Partition 1 being 15MB and Partition 2 being ~8GB.  I'm able to boot into CHDK and i'm able to mess around with settings (mostly) and take pictures.

My issue currently is that the pictures i take go directly to the 15MB partition.  I've triple checked the instructions and verified that all the files are in the proper partitions.  Is there something i'm missing?
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Partition not working properly after booting to CHDK
« Reply #1 on: 12 / March / 2014, 18:14:59 »
What camera are you using?   Cameras released after Jan 2011 do no need - and do not support - dual partitions.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Lastb0isct

  • *
  • 9
Re: Partition not working properly after booting to CHDK
« Reply #2 on: 12 / March / 2014, 18:23:34 »
Quote from: waterwingz on 12 / March / 2014, 18:14:59
What camera are you using?   Cameras released after Jan 2011 do no need - and do not support - dual partitions.

That might be my issue, it's an A3400IS, should i be using single partition with FAT32?
Logged
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Partition not working properly after booting to CHDK
« Reply #3 on: 12 / March / 2014, 18:33:55 »
Yes.

For reference,  the only current and up-to-date guide to installation is here : Prepare your SD card

and the STICK utility it mentions is highly recommended as the best way to install CHDK.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Lastb0isct

  • *
  • 9
Re: Partition not working properly after booting to CHDK
« Reply #4 on: 12 / March / 2014, 18:40:59 »
Quote from: waterwingz on 12 / March / 2014, 18:33:55
Yes.

For reference,  the only current and up-to-date guide to installation is here : Prepare your SD card

and the STICK utility it mentions is highly recommended as the best way to install CHDK.

Thanks for the info, i had seen that guide but  just glazed over the date requirements.  Makes sense.  I reformatted and put the files on and i'm all good.  Thanks for the help!!!!!
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal