When are you planning to create elph 135 platform? Right now it's one of the few shoot and point cameras manufactured and distributed by Canon.
May be I'll ask incorrect question but according to recent CHDK updates - why do you guys put so much work for discontinued camera models and don't start to port the new models?
Do you think that somebody outside would be capable to port a new model from scratch?
Instruction recommends to copy an existing tree. What camera model would be good to start with? There is no any camera for digic 4+ processor.
From your experience, how much time (hours or days) it usually takes to finish (presumably) a new camera model?
Quote from: timgor on 05 / November / 2014, 17:07:51Instruction recommends to copy an existing tree. What camera model would be good to start with? There is no any camera for digic 4+ processor.The normal advice here is to pick a camera released the same date (or as close as possible). Getting a similar model ( A series vs elph vs G vs S vs SX ) can help too but usually the release date is most important.In the case of the IXUS145/ELPH135, only the D30 was released the same day and is also already ported to CHDK.QuoteFrom your experience, how much time (hours or days) it usually takes to finish (presumably) a new camera model?If I did it, probably about 24 hours unless there was a major hardware thing to worry about. Nafraf might be faster than that by quite a bit. As you are new to CHDK, anything under 40 hours for a complete first port would be impressive. But those are just averages - the standard deviation in that statistic is likely huge based on your skill, patience, and plain dumb luck.
Started by fvdk
Started by yukia10
Started by akira
« 1 2 ... 13 14 »
Started by blueSTAR
Started by alvm