S95 - blinking led while shooting video - Script Writing - CHDK Forum  
« previous next »
Pages: [1]   Go Down

S95 - blinking led while shooting video

  • 6 Replies
  • 2611 Views
*

Offline iampk

  • *
  • 3
S95 - blinking led while shooting video
« on: 10 / April / 2014, 08:46:49 »
Advertisements
Hello everybody,
is it possible to make the front led blinking while shooting a video? I'm trying to use a radio usb remote but there is no feedback on camera status (recording or not) if you cannot see the rear LCD.
Thanks in advance!
iampk
« Last Edit: 10 / April / 2014, 09:13:24 by iampk »
Logged
*

Offline waterwingz

  • ******
  • 12138
    • Waterwingz
Re: S95 - blinking led while shooting video
« Reply #1 on: 10 / April / 2014, 09:22:03 »
Very possible with a simple script.  Do you need to be able to make adjustments to the camera ( zoom position, focus, etc) while recording or is a simple start & stop sufficient?
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline iampk

  • *
  • 3
Re: S95 - blinking led while shooting video
« Reply #2 on: 10 / April / 2014, 09:43:50 »
Thanks for your reply! I just need to start & stop video recording with the usb remote and have some feedback on camera status using the front led. And, I have to do it many (5-10) times without the ability to operate the camera (just the remote).
Logged
*

Offline waterwingz

  • ******
  • 12138
    • Waterwingz
Re: S95 - blinking led while shooting video
« Reply #3 on: 10 / April / 2014, 10:00:30 »
Quote from: iampk on 10 / April / 2014, 09:43:50
Thanks for your reply! I just need to start & stop video recording with the usb remote and have some feedback on camera status using the front led. And, I have to do it many (5-10) times without the ability to operate the camera (just the remote).
Check back here later ? I'll try to post something today / tonight.  Some camera's have issues with the LED's being correctly configured - we can fix that too if necessary.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline waterwingz

  • ******
  • 12138
    • Waterwingz
Re: S95 - blinking led while shooting video
« Reply #4 on: 10 / April / 2014, 21:36:43 »
Here you go - give this a try?  You'll have to figure out the LED number for the AF lamp by trial and error.  I think the S95 uses values from 0 to 3.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline iampk

  • *
  • 3
Re: S95 - blinking led while shooting video
« Reply #5 on: 11 / April / 2014, 13:49:05 »
It works! led is number 7 on the s95. Thank you. :D
I added at exit of the inner loop a short blink to confirm recording has stopped.
« Last Edit: 11 / April / 2014, 14:06:45 by iampk »
Logged
*

Offline waterwingz

  • ******
  • 12138
    • Waterwingz
Re: S95 - blinking led while shooting video
« Reply #6 on: 11 / April / 2014, 14:41:09 »
Quote from: iampk on 11 / April / 2014, 13:49:05
It works! led is number 7 on the s95. Thank you. :D
I added at exit of the inner loop a short blink to confirm recording has stopped.
Glad it meets your needs. 

Just an FYI .. with the way you made the change, if the LED happens to be already ON when you press the USB switch to halt recording, you won't see a "blink".
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
Pages: [1]   Go Up
« previous next »
 

Related Topics