IXUS 220hs 101d firmware - page 2 - General Discussion and Assistance - CHDK Forum
« previous next »
Pages: 1 [2]   Go Down

IXUS 220hs 101d firmware

  • 15 Replies
  • 6492 Views
*

Offline Hammer-beam

  • *
  • 11
Re: IXUS 220hs 101d firmware
« Reply #10 on: 24 / April / 2014, 16:21:23 »
Advertisements
STICK - Dave Mitchell 1.09A
OS Type=2 OS Version=8
engine link established
maxsize=64000 testsize=70000 (64GB)

Failed to load either asseng32 or asseng64 libraries

20140221_114310.jpg dropped
C:\Users\Matt\Pictures\2014-04-16\20140221_114310.jpg is being processed
fm=0 icm=0 fms='null'
Photo not taken by Canon camera
Processing completed

IMG_1870.JPG dropped
C:\Users\Matt\Pictures\2013-12-10\IMG_1870.JPG is being processed
fm=16843776 icm=3040000 fms='Firmware Version 1.01'
Checking official builds
Checking if pre-loaded zip C:\Users\Matt\Downloads\test101d.zip exists
zip C:\Users\Matt\Downloads\test101d.zip not found
 - no build found for Canon IXUS 220HS 101d
No official build is available for this camera
Processing completed
Logged
*

Offline srsa_4c

  • ******
  • 4451
Re: IXUS 220hs 101d firmware
« Reply #11 on: 24 / April / 2014, 16:34:53 »
Quote from: Hammer-beam on 24 / April / 2014, 16:21:23
Failed to load either asseng32 or asseng64 libraries
(...)
Checking official builds
Checking if (...)
That's suspicious.
When everything is OK, you should see something like

Checking official builds
Downloading http://zenoshrdlu.com/acid/acidchdk.properties
 - searching for build for Stable CHDK ixus220_elph300hs-100c
 - build found - Stable CHDK bins/ixus220_elph300hs-100c-1.2.0-3418-full_ALPHA.zip
Stable CHDK build is available for this camera
Processing completed

You need to run STICK with admin rights (start it with stickx.cmd), see the "Note for Windows Users" section on http://zenoshrdlu.com/stick/stick.html.
Logged
*

Offline Hammer-beam

  • *
  • 11
Re: IXUS 220hs 101d firmware
« Reply #12 on: 24 / April / 2014, 16:51:31 »
thanks. will try that
Logged
*

Offline zeno

  • *****
  • 891
Re: IXUS 220hs 101d firmware
« Reply #13 on: 24 / April / 2014, 18:23:41 »
That "failed to load ...libraries" message is the reason STICK isn't working. Those two dlls must be in the same directory as the rest of the stick package (the jar file, bat file etc). Perhaps you didn't unzip the stick.zip file properly or only copied some of the files.
Logged
A570, S100, Ixus 127
Author of ASSIST, STICK, WASP, ACID, SDMInst, LICKS, WICKS, MacBoot, UBDB, CFGEdit
*

Offline Hammer-beam

  • *
  • 11
Re: IXUS 220hs 101d firmware
« Reply #14 on: 25 / April / 2014, 05:30:19 »
could it be because my memory card is 4gb?
Logged
*

Offline zeno

  • *****
  • 891
Re: IXUS 220hs 101d firmware
« Reply #15 on: 25 / April / 2014, 07:41:43 »
The IXUS 220 will boot from a 4GB card, but since it's a newer camera it needs to be formatted as FA32. I suggest you reformat the card in the camera (using the Canon format menu option) to guarantee it's FAT32 and then use STICK to install CHDK.
Logged
A570, S100, Ixus 127
Author of ASSIST, STICK, WASP, ACID, SDMInst, LICKS, WICKS, MacBoot, UBDB, CFGEdit
Pages: 1 [2]   Go Up
« previous next »
 

Related Topics
SimplePortal 2.3.6 © 2008-2014, SimplePortal