SX280 / 275 / 270 porting - page 31 - DryOS Development - CHDK Forum supplierdeeply

SX280 / 275 / 270 porting

  • 335 Replies
  • 149407 Views
*

Offline srsa_4c

  • ******
  • 3979
Re: SX280 / 275 / 270 porting
« Reply #300 on: 03 / April / 2017, 20:26:09 »
Advertisements
New release, with "normal" sized default font and other CHDK improvements (port specific code is unchanged).

Changes:
- default font is no longer tiny (but it's uglier due to rough magnification)
- the old, tiny font can still be chosen for OSD elements, by using CHDK Settings -> OSD Layout Editor
- motion detection should work better (by 62ndidiot)
- histogram and zebra are now available, with some limitations (by 62ndidiot)
- custom auto ISO and the Lua get_live_histo function should now work correctly (by reyalp)

Note that thresholds for zebra and custom auto ISO need to be set particularly high on this camera.

When upgrading an existing install, CHDK settings may need to be reset due to the changed palette.

edit:
attachments removed
sx280hs-102b-1.5.0-4781-full.zip (695.94 kB - downloaded 44 times.)
sx280hs-102c_102d-1.5.0-4781-full.zip (695.93 kB - downloaded 52 times.)
« Last Edit: 28 / May / 2017, 06:28:25 by srsa_4c »

Re: SX280 / 275 / 270 porting
« Reply #301 on: 28 / May / 2017, 02:07:56 »
This sx280hs-102c_102d-1.5.0-4781-full.zip
 It's working on sx270?
Thanks.
« Last Edit: 28 / May / 2017, 02:33:20 by gyzoli »

*

Offline srsa_4c

  • ******
  • 3979
Re: SX280 / 275 / 270 porting
« Reply #302 on: 28 / May / 2017, 06:35:16 »
sx280hs-102c_102d-1.5.0-4781-full.zip
 It's working on sx270?
Thanks.
All recent releases in this thread work on all 3 models mentioned in the title: sx270hs, sx275hs, sx280hs.

I have updated the builds rather than fixing the filenames.
The only change I remember is the availability of edge overlay (it has issues though).

edit:
builds removed due to official availability

sx280hs_sx275hs_sx270hs-102b-1.5.0-4814-full.zip (700.8 kB - downloaded 15 times.)
sx280hs_sx275hs_sx270hs-102c_102d-1.5.0-4814-full.zip (700.73 kB - downloaded 18 times.)
« Last Edit: 17 / June / 2017, 11:57:22 by srsa_4c »

*

Offline srsa_4c

  • ******
  • 3979
Re: SX280 / 275 / 270 porting
« Reply #303 on: 17 / June / 2017, 11:56:19 »
As of today, this port is officially released.

Get it from http://chdk.wikia.com/wiki/Downloads , or more specifically, here: unstable/development autobuild.


Re: SX280 / 275 / 270 porting
« Reply #304 on: 17 / June / 2017, 12:44:54 »
As of today, this port is officially released.
Yah !   :xmas

Do you plan to add filewritetask at some point?
Ported :   A1200    SD940   G10    Powershot N    G16

*

Offline srsa_4c

  • ******
  • 3979
Re: SX280 / 275 / 270 porting
« Reply #305 on: 17 / June / 2017, 13:14:03 »
Do you plan to add filewritetask at some point?
Possibly. I don't recall anybody requesting it, though.
I'm currently working on a utility that will finally allow me to jump around in a disassembly (and more) - it should make further development easier, once I finish it. That's the reason I'm not working on CHDK at the moment.

Re: SX280 / 275 / 270 porting
« Reply #306 on: 15 / September / 2017, 04:10:11 »
As of today, this port is officially released.

Get it from http://chdk.wikia.com/wiki/Downloads , or more specifically, here: unstable/development autobuild.


Thank you, much appreciated !

*

Offline srsa_4c

  • ******
  • 3979
Re: SX280 / 275 / 270 porting
« Reply #307 on: 21 / January / 2018, 12:34:21 »
Do you plan to add filewritetask at some point?
Possibly.
I have finally added filewritetask / PTP remote shooting support in r4979.
I basically just reused the implementation found in the G16 port. Most of the code and all offsets seemed to match, so I did not have to do any debugging.
While testing some of the more dreaded shooting modes (sports, hi speed burst), I found that rs -cont and rs -quick makes more shots than usual (7 shots when 5 was requested). The last of those 7 shots was written to the card. This is obviously something that would require some debugging.
Regular modes (Av, Tv, P, M) work better, that's the reason I decided in favor of publication.
After remote shooting, there's no problem with switching to and from playback mode.


Re: SX280 / 275 / 270 porting
« Reply #308 on: 29 / March / 2018, 14:08:22 »
Kindly requesting assistance here.
Since sx280hs-102c-1.5.0-500x every release is faulty on SX280hs. The last good working release is sx280hs-102c-1.5.0-4924 at me but it is possible I've missed some still working releases.
The fault descripiton is the following. After taking picture the camera signals SD card failure and so can't take pictures anymore. Have to switch camera on/off again to make pictures again.
That never happens with builds below 500x.

*

Offline srsa_4c

  • ******
  • 3979
Re: SX280 / 275 / 270 porting
« Reply #309 on: 29 / March / 2018, 14:12:39 »
After taking picture the camera signals SD card failure and so can't take pictures anymore. Have to switch camera on/off again to make pictures again.
That never happens with builds below 500x.
Thanks for reporting.
I've probably screwed up something when I added filewritetask support to the port. I'll take a look.

edit:
There was a typo in the 102c source, affecting 102c and 102d cameras. Should be fixed in revision 5006.
« Last Edit: 29 / March / 2018, 14:23:36 by srsa_4c »

 

Related Topics