SX280 / 275 / 270 porting - page 26 - DryOS Development - CHDK Forum
« previous next »
Pages: 1 ... 21 22 23 24 25 [26] 27 28 29 30 31 ... 37   Go Down

SX280 / 275 / 270 porting

  • 365 Replies
  • 239929 Views
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: SX280 / 275 / 270 porting
« Reply #250 on: 24 / January / 2016, 15:34:22 »
Advertisements
Quote from: Arte Automobilistica on 24 / January / 2016, 13:49:59
I lock it and put it in the camera and start by pushing the play button.
...
Either way the camera just starts as normal with no sign of CHDK.
Does the camera display a "Card Locked" message when you do this ?
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Arte Automobilistica

  • *
  • 11
Re: SX280 / 275 / 270 porting
« Reply #251 on: 24 / January / 2016, 16:36:02 »
No it doesn't. I can take photos as normal.
Logged
*

Offline reyalp

  • ******
  • 14128
Re: SX280 / 275 / 270 porting
« Reply #252 on: 24 / January / 2016, 17:04:28 »
Quote from: Arte Automobilistica on 24 / January / 2016, 16:36:02
No it doesn't. I can take photos as normal.
Two possibilities come to mind:
1) CHDK is actually loaded, but the splash screen isn't displayed. Have you tried pressing the alt button (should default to "play" on this camera)
2) Your camera does not correctly detect the lock switch. We have seen this happen before on other cameras, and it tends to go unnoticed because most people don't lock their cards. Sometimes poking the lock switch in the SD card slot can remedy this. Or maybe the plastic tab on the card is out of spec and a different one will work. You can also try a locked card that does not have any CHDK stuff on it. The camera should report "card locked".
Logged
Don't forget what the H stands for.
*

Offline Arte Automobilistica

  • *
  • 11
Re: SX280 / 275 / 270 porting
« Reply #253 on: 25 / January / 2016, 14:36:53 »
Quote from: reyalp on 24 / January / 2016, 17:04:28
2) Your camera does not correctly detect the lock switch ... and it tends to go unnoticed because most people don't lock their cards.Or maybe the plastic tab on the card is out of spec and a different one will work.

I tried another card and loaded CHDK without problems using STICK. Strangely you can actually hear how the lock switch catches every time I put in the old card.

Thank you reyalp, waterwingz and srsa 4c.
Logged
*

Offline hebert2099

  • *
  • 3
Re: SX280 / 275 / 270 porting
« Reply #254 on: 25 / January / 2016, 16:16:09 »
My camera do not update to oficial firmware. Shows "update file error!!!". Whats the problem?
Logged
*

Offline reyalp

  • ******
  • 14128
Re: SX280 / 275 / 270 porting
« Reply #255 on: 25 / January / 2016, 16:39:05 »
Quote from: hebert2099 on 25 / January / 2016, 16:16:09
My camera do not update to oficial firmware. Shows "update file error!!!". Whats the problem?
Which exact camera and firmware version do you have?

Are you running CHDK? I would strongly suggest not attempting to do a Canon firmware update with CHDK running. I'd suggest using a card that is freshly formatted or has never been used with CHDK.

If you are having trouble with a Canon update, you should contact Canon support.

Logged
Don't forget what the H stands for.
*

Offline hebert2099

  • *
  • 3
Re: SX280 / 275 / 270 porting
« Reply #256 on: 26 / January / 2016, 21:03:22 »
Quote from: reyalp on 25 / January / 2016, 16:39:05
Quote from: hebert2099 on 25 / January / 2016, 16:16:09
My camera do not update to oficial firmware. Shows "update file error!!!". Whats the problem?
Which exact camera and firmware version do you have?

Are you running CHDK? I would strongly suggest not attempting to do a Canon firmware update with CHDK running. I'd suggest using a card that is freshly formatted or has never been used with CHDK.

If you are having trouble with a Canon update, you should contact Canon support.
My camera is SX 270 and firmware 101b. I follow the steps of the site of canon, but nothing changed. Only error message.
Logged
*

Offline reyalp

  • ******
  • 14128
Re: SX280 / 275 / 270 porting
« Reply #257 on: 26 / January / 2016, 22:34:35 »
Quote from: hebert2099 on 26 / January / 2016, 21:03:22
My camera is SX 270 and firmware 101b. I follow the steps of the site of canon, but nothing changed. Only error message.
The ver.req info screen should also show a public version number, like 1.0.1.0. What does this show?

Note that a Canon firmware update needs to be specifically for the SX270, even though the SX280 and SX275 firmwares are compatible from a CHDK POV.

Assuming you are using an update intended for your camera, and version is listed on http://www.canon-europe.com/support/consumer_products/products/cameras/digital_compact/powershot_sx_series/powershot_sx270_hs.aspx?type=firmware&firmwaredetailid=tcm:13-1061909 as being upgradable, I'd suggest contacting Canon support.
Logged
Don't forget what the H stands for.
*

Offline hebert2099

  • *
  • 3
Re: SX280 / 275 / 270 porting
« Reply #258 on: 27 / January / 2016, 08:25:28 »
Quote
The ver.req info screen should also show a public version number, like 1.0.1.0. What does this show?

Note that a Canon firmware update needs to be specifically for the SX270, even though the SX280 and SX275 firmwares are compatible from a CHDK POV.

Assuming you are using an update intended for your camera, and version is listed on http://www.canon-europe.com/support/consumer_products/products/cameras/digital_compact/powershot_sx_series/powershot_sx270_hs.aspx?type=firmware&firmwaredetailid=tcm:13-1061909 as being upgradable, I'd suggest contacting Canon support.
I made it and yes, you solve my problem. Thank You so much!
Logged
*

Offline Pier92

  • *
  • 5
Re: SX280 / 275 / 270 porting
« Reply #259 on: 09 / February / 2016, 05:29:03 »
Hello to all
I have a Canon SX270 HS camera
with CHDK .
When I enable the photos in RAW camera saves files in dng
photos have a distortion problem, how can I eliminate the effect fisheye??
Logged
Pages: 1 ... 21 22 23 24 25 [26] 27 28 29 30 31 ... 37   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal