Photogrammetry using Canon super zooms - page 2 - Feature Requests - CHDK Forum
« previous next »
Pages: 1 [2] 3   Go Down

Photogrammetry using Canon super zooms

  • 20 Replies
  • 11639 Views
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Photogrammetry using Canon super zooms
« Reply #10 on: 07 / June / 2014, 21:42:12 »
Advertisements
Quote from: philmoz on 07 / June / 2014, 21:19:51
Wouldn't you need to be shooting with a script for that to work, in order for the script to get the subject distance value?
Yea - that was the "plan".

Quote
Writing the SD value to the DNG EXIF means it's available for calculating values at any time (either on the camera, or on a PC).
Obviously a much better choice once you get it working. Didn't mean to imply otherwise.
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline Syllia

  • *
  • 4
Re: Photogrammetry using Canon super zooms
« Reply #11 on: 08 / June / 2014, 21:27:53 »
I appreciate the hassle of dealing with exif data, having attempted to read it with a vba application.  If is easier to append the data to a text file in the photo directory this would be fine.  Individual sidecar files would also work but are more fiddly.  I would also like to confirm that some photo editors show the subject distance information and other don't.  I can confirm that the sx50 does write the subject distance in the exif data but I don't know the units.
Logged
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: Photogrammetry using Canon super zooms
« Reply #12 on: 08 / June / 2014, 22:11:08 »
Quote from: Syllia on 08 / June / 2014, 21:27:53
I appreciate the hassle of dealing with exif data, having attempted to read it with a vba application.  If is easier to append the data to a text file in the photo directory this would be fine.  Individual sidecar files would also work but are more fiddly.  I would also like to confirm that some photo editors show the subject distance information and other don't.  I can confirm that the sx50 does write the subject distance in the exif data but I don't know the units.

The exiftool program (http://www.sno.phy.queensu.ca/~phil/exiftool/) can be used to view pretty much any image metadata. For Windows there is also a GUI interface for exiftool (http://u88.n24.queensu.ca/~bogdan/). You can use the command line with exiftool to extract specific tag values from image files.

On my cameras (G12, G1X & SX40) the 'FocusDistanceUpper' value that Canon writes to the JPEG files is measured in meters; but appears to be truncated down to the nearest centimeter.

Phil.
Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline reyalp

  • ******
  • 14126
Re: Photogrammetry using Canon super zooms
« Reply #13 on: 15 / June / 2014, 02:01:13 »
Quote from: philmoz on 07 / June / 2014, 20:49:39
I'm testing a mod to add the 'SubjectDistance' tag to the DNG EXIF data, so at least it would be available in CHDK DNG files. For close focus distances it's fairly accurate.
I noticed using "focus at infinity" on my elph130 this ends up being shown as -1/1000 in raw therapee and -0.0 in irfanview.

Unless there is a standard for "infinity" we should probably just use some arbitrary large number.

edit:
It is tagged as a "rational" rather than srational, so technically these programs are at fault for treating it as signed.
« Last Edit: 15 / June / 2014, 02:06:47 by reyalp »
Logged
Don't forget what the H stands for.
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: Photogrammetry using Canon super zooms
« Reply #14 on: 15 / June / 2014, 02:36:45 »
Quote from: reyalp on 15 / June / 2014, 02:01:13
Quote from: philmoz on 07 / June / 2014, 20:49:39
I'm testing a mod to add the 'SubjectDistance' tag to the DNG EXIF data, so at least it would be available in CHDK DNG files. For close focus distances it's fairly accurate.
I noticed using "focus at infinity" on my elph130 this ends up being shown as -1/1000 in raw therapee and -0.0 in irfanview.

Unless there is a standard for "infinity" we should probably just use some arbitrary large number.

edit:
It is tagged as a "rational" rather than srational, so technically these programs are at fault for treating it as signed.

Any suggestions for the value?
2^31 - 1 will fix the sign issue; but isn't a very meaningful number.

Canon use 65535 in the FocusDistanceUpper tag (shows as 65.53m).

Phil.
Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Photogrammetry using Canon super zooms
« Reply #15 on: 15 / June / 2014, 08:44:33 »
Quote from: philmoz on 15 / June / 2014, 02:36:45
Any suggestions for the value?
What about the #defined CAMERA_MAX_DIST in platform_camera.h ?
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: Photogrammetry using Canon super zooms
« Reply #16 on: 15 / June / 2014, 09:07:40 »
Quote from: waterwingz on 15 / June / 2014, 08:44:33
Quote from: philmoz on 15 / June / 2014, 02:36:45
Any suggestions for the value?
What about the #defined CAMERA_MAX_DIST in platform_camera.h ?

That's another possibility, although I was thinking a common value for 'infinity' across cameras might be more easily understood.

Phil.
Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline waterwingz

  • ******
  • 12140
    • Waterwingz
Re: Photogrammetry using Canon super zooms
« Reply #17 on: 15 / June / 2014, 09:18:46 »
Quote from: philmoz on 15 / June / 2014, 09:07:40
That's another possibility, although I was thinking a common value for 'infinity' across cameras might be more easily understood.
I seem to recall some talk about some cams using a 16 bit value (hence the 65535) and others a 32 bit value?
Logged
Ported :   A1200    SD940   G10    Powershot N    G16
*

Offline philmoz

  • *****
  • 3450
    • Photos
Re: Photogrammetry using Canon super zooms
« Reply #18 on: 15 / June / 2014, 15:47:07 »
Quote from: waterwingz on 15 / June / 2014, 09:18:46
Quote from: philmoz on 15 / June / 2014, 09:07:40
That's another possibility, although I was thinking a common value for 'infinity' across cameras might be more easily understood.
I seem to recall some talk about some cams using a 16 bit value (hence the 65535) and others a 32 bit value?

AFAIK, they all use 0xFFFFFFFF to mean infinity.

Phil.


Logged
CHDK ports:
  sx30is (1.00c, 1.00h, 1.00l, 1.00n & 1.00p)
  g12 (1.00c, 1.00e, 1.00f & 1.00g)
  sx130is (1.01d & 1.01f)
  ixus310hs (1.00a & 1.01a)
  sx40hs (1.00d, 1.00g & 1.00i)
  g1x (1.00e, 1.00f & 1.00g)
  g5x (1.00c, 1.01a, 1.01b)
  g7x2 (1.01a, 1.01b, 1.10b)
*

Offline reyalp

  • ******
  • 14126
Re: Photogrammetry using Canon super zooms
« Reply #19 on: 15 / June / 2014, 16:30:30 »
After a bit of googling, I found https://www.flickr.com/groups/d7000-club/discuss/72157629452791882/
ignoring the people trying to make 2^32-1 a real distance... it leads to the CIPA spec which says

Quote
SubjectDistance

The distance to the subject, given in meters. Note that if the numerator of the recorded value is FFFFFFFF.H, Infinity shall be indicated; and if the numerator is 0, Distance unknown shall be indicated.
So, phil's original code is right, raw therapee and irfanview are wrong. Since it's actually specified in the spec, I'd say leave it as is even though some programs are confused.

edit:
I apologize for the tangent  :-[
Logged
Don't forget what the H stands for.
Pages: 1 [2] 3   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal