Building a mult-camera rig - page 22 - Hotwire! Hardware Mods, Accessories and Insights - CHDK Forum
supplierdeeply

Building a mult-camera rig

  • 244 Replies
  • 37388 Views
Advertisements
@waterwings , usb remote already works great , I need patch for the zoom distortion

Regards

@waterwings , usb remote already works great , I need patch for the zoom distortion
Do you mean the changes described in this post :  A2500 porting thread

They are already enabled in the platform_camera.h file for the A2500.
« Last Edit: 26 / October / 2014, 13:35:21 by waterwingz »
Ported :   A1200    SD940   G10    Powershot N    G16

R u sure ?
I am having zoom distortion when using set_zoom

R u sure ?
Yes.

Quote
I am having zoom distortion when using set_zoom
Have you been following mphx's issue in this thread : Multi-camera setup project.
Ported :   A1200    SD940   G10    Powershot N    G16


I am using a2500-100a-1.3.0-3492-full while the zoom patch was added to rev 3586

I checked mphx's and hope to test this code in the following days
Code: [Select]
!mc:cmdwait('call repeat click("zoom_in") until get_zoom() >= 10')

regards



I am using a2500-100a-1.3.0-3492-full while the zoom patch was added to rev 3586
So I'd suggest testing the newer version first!

Quote
I checked mphx's and hope to test this code in the following days
Code: [Select]
!mc:cmdwait('call repeat click("zoom_in") until get_zoom() >= 10')
This is definitely your second choice (see reyalp's comments about trying to make it work reliably)
Ported :   A1200    SD940   G10    Powershot N    G16

*

Online reyalp

  • ******
  • 12059
So I'd suggest testing the newer version first!
According to mphx (also using a2500) the change reduces the amount of distortion but doesn't eliminate it.
Don't forget what the H stands for.

*

Offline srsa_4c

  • ******
  • 3979
According to mphx (also using a2500) the change reduces the amount of distortion but doesn't eliminate it.
I'd like to see a side-by-side comparison (old CHDK release vs new release), but somehow all our requests get ignored...


Hi All 

I tried to use mphx command without success

Code: [Select]
con> !mc:cmdwait('call repeat click("zoom_in") until get_zoom() >= 10')
ERROR: call failed:[string "mc:cmdwait('call repeat click("zoom_in") unti..."]:1
: attempt to index global 'mc' (a nil value)
stack traceback:
        [C]: in function 'xpcall'
        C:\chdkptp\lua\cli.lua:566: in function <C:\chdkptp\lua\cli.lua:561>
        (...tail calls...)
        [C]: in function 'xpcall'
        C:\chdkptp\lua\cli.lua:244: in function 'execute'
        C:\chdkptp\lua\cli.lua:351: in function <C:\chdkptp\lua\cli.lua:342>
        (...tail calls...)
        C:\chdkptp\lua\main.lua:262: in main chunk
        [C]: in function 'require'
        [string "require('main')"]:1: in main chunk



I would appreciate your assitance

*

Online reyalp

  • ******
  • 12059
Hi All 

I tried to use mphx command without success
Code: [Select]
: attempt to index global 'mc' (a nil value)
The error message means that 'mc' is not defined, presumably meaning that you have not loaded the multicam module.

Multicam is not loaded by default. If you are using it, you'd typically start with something like
Code: [Select]
!mc=require'multicam'
!mc:connect()
!mc:start()
See the source for more information.

Don't forget what the H stands for.

 

Related Topics