ELPH 340 (IXUS 265) - page 14 - DryOS Development - CHDK Forum
« previous next »
Pages: 1 ... 9 10 11 12 13 [14] 15 16 17 18   Go Down

ELPH 340 (IXUS 265)

  • 174 Replies
  • 101108 Views
*

Offline blackhole

  • *****
  • 947
  • A590IS 101b
    • Planetary astrophotography
Re: ELPH 340 (IXUS 265)
« Reply #130 on: 05 / May / 2020, 10:21:38 »
Advertisements
Quote from: Caefix on 05 / May / 2020, 09:57:22
??? PTP waiting for connection.
Check the USB cable and go to
CHDK settings >> Remote parameters >> Enable remote []

The USB remote option must be disabled to use the PTP Extension.
The libUSB-win32 driver is specific to the selected model. If you use more than one camera model with chdkptp client, you need to install a driver for each one.
Logged
*

Offline Caefix

  • *****
  • 948
  • Sorry, busy deleting test shots...
Re: ELPH 340 (IXUS 265)
« Reply #131 on: 05 / May / 2020, 10:55:13 »
 :D Thx, I had a   ":P"  with Zadig tool.
exec require'camtests'.runbatch{bench=true,filexfer=true,shoot=true,xfersizebugs=true} =>25/0
Logged
All lifetime is a loan from eternity.
*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: ELPH 340 (IXUS 265)
« Reply #132 on: 17 / May / 2020, 11:04:07 »
@blackhole

Tv/ISO overrides work OK, llibtst.lua passes without errors. Nothing abnormal detected during testing, feels stable (tested on trunk 5479). In short, you've got my vote for a commit - also because it needs a stubs rebuild in order to becompatible with srsa_4c's exmem updates (5480-5483) as far as I can tell (which is not very far).
cheers,
whim




Logged
*

Offline blackhole

  • *****
  • 947
  • A590IS 101b
    • Planetary astrophotography
Re: ELPH 340 (IXUS 265)
« Reply #133 on: 17 / May / 2020, 13:39:07 »


Quote from: whim on 17 / May / 2020, 11:04:07


Tv/ISO overrides work OK, llibtst.lua passes without errors. Nothing abnormal detected during testing, feels stable (tested on trunk 5479). In short, you've got my vote for a commit - also because it needs a stubs rebuild in order to becompatible with srsa_4c's exmem updates (5480-5483) as far as I can tell (which is not very far).
cheers,
whim

Thanks for the report.

Poslano sa mog GT-I9301I koristeći Tapatalk

Logged
*

Offline Caefix

  • *****
  • 948
  • Sorry, busy deleting test shots...
Re: ELPH 340 (IXUS 265)
« Reply #134 on: 04 / July / 2020, 14:06:06 »
 ??? FW-Update opens lens.
Logged
All lifetime is a loan from eternity.
*

Offline Nutter

  • *
  • 3
Re: ELPH 340 (IXUS 265)
« Reply #135 on: 12 / October / 2020, 21:50:23 »
@blackhole: Is there a final build of the firmware available? The last one you posted is from April 13, but it looks like there were a few fixes between that build and when you submitted the patch on May 18. Unfortunately it's not in autobuild yet, as per @reyalp's reply in the patches thread ("Autobuild is disabled, as it was in the patch."), so I can't get the build there.

I'm looking for an updated build as the build posted on April 13 doesn't load in either the Firmware Update method or the bootable SD method (camera appears to just crash - no CHDK screen, just a blank screen until the battery is removed & replaced).
Logged
*

Offline whim

  • ******
  • 2046
  • A495/590/620/630 ixus70/115/220/230/300/870 S95
Re: ELPH 340 (IXUS 265)
« Reply #136 on: 13 / October / 2020, 04:48:02 »
@Nutter

Here's the latest trunk build (5577) Tested to work in both firmware update and bootable SD mode.
hope that helps,
whim
Logged
*

Offline blackhole

  • *****
  • 947
  • A590IS 101b
    • Planetary astrophotography
Re: ELPH 340 (IXUS 265)
« Reply #137 on: 13 / October / 2020, 05:26:03 »
Quote from: whim on 13 / October / 2020, 04:48:02
Here's the latest trunk build (5577) Tested to work in both firmware update and bootable SD mode.
hope that helps,
whim
Thanks!

@Nutter
Did you check if your camera has a 100c firmware version?
CHDK will only work on cameras with 100c firmware.

EDIT: link
https://chdk.fandom.com/wiki/FAQ#Q._How_can_I_get_the_original_firmware_version_number_of_my_camera.3F
« Last Edit: 13 / October / 2020, 05:59:36 by blackhole »
Logged
*

Offline Nutter

  • *
  • 3
Re: ELPH 340 (IXUS 265)
« Reply #138 on: 13 / October / 2020, 19:39:37 »
Quote from: whim on 13 / October / 2020, 04:48:02
Here's the latest trunk build (5577) Tested to work in both firmware update and bootable SD mode.
Thanks for doing that!

Quote from: blackhole on 13 / October / 2020, 05:26:03
Did you check if your camera has a 100c firmware version?
CHDK will only work on cameras with 100c firmware.
That was the problem - my camera's running firmware 100a unfortunately. Thanks though!
Logged
*

Offline blackhole

  • *****
  • 947
  • A590IS 101b
    • Planetary astrophotography
Re: ELPH 340 (IXUS 265)
« Reply #139 on: 14 / October / 2020, 08:21:13 »
Quote from: Nutter on 13 / October / 2020, 19:39:37
That was the problem - my camera's running firmware 100a unfortunately. Thanks though!
If you can obtain a firmware dump, I can take a look. It may not be necessary to create a new port.
https://chdk.fandom.com/wiki/Canon_Basic/Card_Setup
https://chdk.fandom.com/wiki/Canon_Basic/Scripts/Dumper
Logged
Pages: 1 ... 9 10 11 12 13 [14] 15 16 17 18   Go Up
« previous next »
 

Related Topics


SimplePortal © 2008-2014, SimplePortal