Bug report: || won't fix: A550,A560,I75 || fixed: SX20,I200,I960,I970,SD870

nafraf

1308

Re: Bug report? A560, SD870, IXUS 960, SX20

« Reply #10 on: 12 / July / 2014, 17:26:18 »

Advertisements

I'll try to fix sx20. Jogdial task seems to be wrong too.

Logged

nafraf

1308

Re: Bug report? A560, SD870, IXUS 960, SX20

« Reply #11 on: 12 / July / 2014, 18:27:45 »

SX20 100f Test version:
- Simpler loader code
- boot.c rewritten using code_gen (power up button detection and JogDial_task_my modified)
EDIT: attachment deleted.

« Last Edit: 23 / July / 2014, 22:56:45 by nafraf »

Logged

koshy

1096

Re: Bug report? A560, SD870, IXUS 960, SX20

« Reply #12 on: 13 / July / 2014, 07:56:39 »

Quote from: nafraf on 12 / July / 2014, 18:27:45

SX20 100f Test version:

I tested your build, thanks for posting it.

The power on button is working just fine now.

If "Jogdial task" means that you can use the jog dial to navigate on CHDK menus that also works.
I didn't compare with the previous version so I'm not sure if it worked before.

Logged

Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

nafraf

1308

Re: Bug report? A560, SD870, IXUS 960, SX20

« Reply #13 on: 13 / July / 2014, 12:23:14 »

Thanks for testing it. Changes included in trunk Changeset 3506.

This camera seems to have low memory. Then in attachment a test version where CHDK is loaded in ARAM. Could you test it and report? Thanks

« Last Edit: 14 / July / 2014, 11:38:43 by nafraf »

Logged

koshy

1096

Re: Bug report? A560, SD870, IXUS 960, SX20

« Reply #14 on: 14 / July / 2014, 08:34:37 »

Quote from: nafraf on 13 / July / 2014, 12:23:14

This camera seems to have low memory. Then in attachment a test version where CHDK is loaded in ARAM. Could you test it and report? Thanks

Your attachment is for FW 1.02D while I have FW 1.00F
Please attach the build for my FW and I'll test it.

Logged

Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

koshy

1096

Re: Bug report? A560, SD870, IXUS 960, SX20, IXUS 75

« Reply #15 on: 14 / July / 2014, 08:41:43 »

I updated the original post on page 1 as I found that IXUS 75 with FW 1.01B has the same power button problem.

The same applies to A550 with FW 1.00C
And to IXUS 970 IS with FW 1.00D

« Last Edit: 14 / July / 2014, 09:31:18 by koshy »

Logged

Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

nafraf

1308

Re: Bug report? A560, SD870, IXUS 960, SX20

« Reply #16 on: 14 / July / 2014, 11:38:19 »

Quote from: koshy on 14 / July / 2014, 08:34:37

Your attachment is for FW 1.02D while I have FW 1.00F

Sorry, my mistake. New file in attachment.

« Last Edit: 23 / July / 2014, 22:57:11 by nafraf »

Logged

koshy

1096

Re: Bug report? A560, SD870, IXUS 960, SX20, IXUS 75, A550, IXUS 970

« Reply #17 on: 14 / July / 2014, 15:16:57 »

Quote from: nafraf on 14 / July / 2014, 11:38:19

Sorry, my mistake. New file in attachment.

No problem. Thanks for the update. I tested your build and it worked just fine. It boots on power button, I set CHDK up to shoot a DNG, took a shot and that worked. So if you'd like anything specific tried beyond that let me know.

Logged

Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

nafraf

1308

Re: Bug report? A560, SD870, IXUS 960, SX20, IXUS 75, A550, IXUS 970

« Reply #18 on: 14 / July / 2014, 15:50:15 »

Could you test if zebra works with sx20?

I created a new version for ixus860/sd870, boot.c, capt_seq.c, movie_rec.c are created using code_gen. There are a lot of changes, then a full test is required. Please start testing if power up button works and if CHDK loads without problems. After that, please run tests as described here: http://chdk.wikia.com/wiki/Testing

« Last Edit: 23 / July / 2014, 22:57:24 by nafraf »

Logged

koshy

1096

Re: Bug report? A560, SD870, IXUS 960, SX20, IXUS 75, A550, IXUS 970

« Reply #19 on: 14 / July / 2014, 17:12:48 »

Quote from: nafraf on 14 / July / 2014, 15:50:15

Could you test if zebra works with sx20?

I tested it and think it does not work.

I set exposure compensation to +2.

Then I set:

Draw Zebra: On
Mode: Zebra 1 (also tried Solid)
Thresholds: 0, 1
Draw Over Zebra: Nothing

I didn't see anything that resembles a zebra. Just plain white areas when pointed towards a lamp.

Logged

Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)