Startup Problem on SX40 - General Help and Assistance on using CHDK stable releases - CHDK Forum supplierdeeply

Startup Problem on SX40

  • 7 Replies
  • 2897 Views
Startup Problem on SX40
« on: 16 / August / 2014, 18:44:39 »
Advertisements
I installed this version of CHDK on my SX40; sx40hs-100i-1.2.0-3575-full.zip  After doing so, my camera would not start up normally.  It started fast, but the Auto-Focus would take another 6 or 7 seconds to load.  When I removed the CHDK files from the SD card, that issue cleared up, so it must have been having the CHDK files on the SD card that was somehow interfering with the camera's operation.  Any ideas on what might be the problem here?
« Last Edit: 16 / August / 2014, 18:46:32 by NaturalPath »

Re: Startup Problem on SX40
« Reply #1 on: 16 / August / 2014, 18:53:16 »
It started fast, but the Auto-Focus would take another 6 or 7 seconds to load.  When I removed the CHDK files from the SD card, that issue cleared up, so it must have been having the CHDK files on the SD card that was somehow interfering with the camera's operation.  Any ideas on what might be the problem here?
Can you describe in detail the steps you used to install CHDK onto your SD card?  And does it autoboot so that you see the CHDK logo each time the camera starts?   Or are you using the "firmware update" method to load CHDK?

Also, I'm not sure what it means to load "auto-focus"?  What are you trying to describe here ?
Ported :   A1200    SD940   G10    Powershot N    G16

Re: Startup Problem on SX40
« Reply #2 on: 16 / August / 2014, 19:40:40 »
I checked the version of firmware I had by installing vers.req file on my CD card.  It came back as version 1.00I, so I downloaded that version, and unpacked it onto my CD card.  It started up using the firmware update method, and all seemed well.

The camera starts in about 3 seconds, but all functions will not operate until the Auto-Focus loads up.
« Last Edit: 16 / August / 2014, 19:43:11 by NaturalPath »

Re: Startup Problem on SX40
« Reply #3 on: 16 / August / 2014, 19:43:17 »
I checked the version of firmware I had by installing vers.req file on my CD card.  It came back as version 1.00I, so I downloaded that version, and unpacked it onto my CD card.  It started up using the firmware update method, and all seemed well.
So if you are just using just the firmware update method as described, then it's not possible for the presence of CHDK files on your SD card to do anything at all to your camera if you don't load CHDK.

Ported :   A1200    SD940   G10    Powershot N    G16


Re: Startup Problem on SX40
« Reply #4 on: 16 / August / 2014, 19:57:04 »
I do understand what you're saying, and I agree.  However, I can't explain it any other way.  It's a fact.  When I removed the CHDK files from the SD card the camera began working normally again.  I will try to install CHDK in the future again, but right now I'm not that advanced, and I don't need the features that CHDK unlocks.  What I do need to do, is to learn everything I can about the standard operation of this camera, before I get into anything more complex.  Thank you for your quick replies though.

Re: Startup Problem on SX40
« Reply #5 on: 16 / August / 2014, 19:59:11 »
I do understand what you're saying, and I agree.  However, I can't explain it any other way.  It's a fact.  When I removed the CHDK files from the SD card the camera began working normally again.
How big is the SD card you are trying to use?
Ported :   A1200    SD940   G10    Powershot N    G16

Re: Startup Problem on SX40
« Reply #6 on: 16 / August / 2014, 20:06:40 »
32 gigs Class10
« Last Edit: 16 / August / 2014, 20:08:50 by NaturalPath »

Re: Startup Problem on SX40
« Reply #7 on: 19 / August / 2014, 14:33:17 »
Just as an update to this.  I have now reformatted the card, inside the camera, and reinstalled the CHDK package on the 32gig class 10 SD card.  Everything is functioning as it should now.  I will post again should any abnormalities appear.  Thanks for the assistance.


 

Related Topics


SimplePortal 2.3.6 © 2008-2014, SimplePortal