Adding feature support "File Write Task" (FWT): 52 Cams || 41 done || 11 to go - page 23 - General Discussion and Assistance - CHDK Forum

Adding feature support "File Write Task" (FWT): 52 Cams || 41 done || 11 to go

  • 258 Replies
  • 94075 Views
*

Offline srsa_4c

  • ******
  • 4451
Advertisements
Regarding the crashes (a560, ixus75):
The crash reasons are various exceptions, I suspect stack corruption/overflow (LR is okay, PC is not).
CHDK-shell doesn't pick up the correct dump file (as it was not adjusted to the new style build process used in trunk). This dump is located in platform/[camera]/sub/[fwver]/ and is named main.bin.dump. I'm not sure if the dump would say much more about the circumstances though.

*

Offline nafraf

  • *****
  • 1308
Thanks. ixus950_sd850, a570, ixus55_sd450, s3is and ixus65_sd630 updated. Trunk  r4183 - r4188.

Patch to ixus70_sd1000 bitmap palette in attachment.


*

Offline koshy

  • *****
  • 1096
This dump is located in platform/[camera]/sub/[fwver]/ and is named main.bin.dump. I'm not sure if the dump would say much more about the circumstances though.
I don't see a file like that anywhere.
Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

*

Offline srsa_4c

  • ******
  • 4451
I don't see a file like that anywhere.
I'd guess CHDK-shell runs 'make clean' after build is finished.

The attached script update should be able to pick up the file from its newer location. It's untested though.
If you'd like to try it: copy the .au3 script to the CHDK shell root folder (where the CHDK-Shell*.exe executables are), and start it instead of the official .exe . You need to have AutoIt installed for this to work.

*

Offline msl

  • *****
  • 1280
  • A720 IS, SX220 HS 1.01a
    • CHDK-DE links
I'd guess CHDK-shell runs 'make clean' after build is finished.
That could help eventually: CHDK shell => Compile Option .. => Skip GMAKE clean AFTER

msl
CHDK-DE:  CHDK-DE links

*

Offline koshy

  • *****
  • 1096
That could help eventually: CHDK shell => Compile Option .. => Skip GMAKE clean AFTER
Thank you for that hint. I'll set that option in addition to trying the altered shell.

The attached script update should be able to pick up the file from its newer location. It's untested though.
Thank you. I did use it to re-compile the A560 and I75 builds in the trunks I used for testing before. I hope they will be identical so that the new logs will go together with the ROMLOGS. I also included the main.bin.dump files now that MSL pointed out the option to use to keep them available.
Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

*

Offline koshy

  • *****
  • 1096
Patch to ixus70_sd1000 bitmap palette in attachment.
Thank you.

- this one fixes the situation with UI overlay I described as every even button press failing
- on Canon menu items the palette on camera now is matched in CHDKPTP

- the CHDK display items stay white in CHDKPTP
- the CHDK menu palette is still gray / transparent
both shown in the old screen shots

(I did use the reset all colors entry from the CHDK menu)
Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

*

Offline koshy

  • *****
  • 1096
As reported here I75 only powers on using Play button and the touch control dial interferes with the CHDK menu etc. in ALT mode as was the case for I960 which reyalp fixed in a recent patch.
The I75 touch control dial issue got fixed and tested here.
Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

*

Offline nafraf

  • *****
  • 1308
- the CHDK menu palette is still gray / transparent
both shown in the old screen shots

(I did use the reset all colors entry from the CHDK menu)
using Ixus70, could you use the option "Draw Palette" and post an image? Thanks

*

Offline koshy

  • *****
  • 1096
using Ixus70, could you use the option "Draw Palette" and post an image? Thanks
Sure. This is a screen cap from CHDKPTP. I made sure that it's identical to what the camera shows me. Since that was the case screen shot was the easier way to go.
Koshy had a little ELPH which wasn't white as snow but everywhere that Koshy went the ELPH was sure to go. (actually an SD, but that detail ruins the rhyme...)

 

Related Topics


SimplePortal © 2008-2014, SimplePortal